Back to search

National Technical University of Athens (NTUA)

Συσχέτιση μαγνητικών και μηχανικών ιδιοτήτων με μικροδομή σε συγκολλήσεις φερρομαγνητικών χαλύβων

Abstract

dc:description

Non-destructive testing - NDT is used to describe methods, which can be applied to a construction or a test specimen, without compromising the usefulness of the material. Most of the non-destructive methods evaluate an intrinsic property of the material. The increasing applications of non-destructive testing on industrial scale intensify the effort to bring the existing methods in given quality standards. Therefore, a suitable sensor for non-destructive testing should be able to identify those parameters, which are crucial in detecting possible faults or defects.Compared to other non destructive methods, testing by magnetic sensors has a distinct advantage, which is common only in destructive testing methods: the intrinsic magnetic properties are affected by the same microstructural parameters and present a similar sensitivity to the existence of residual stresses within a material as mechanical properties do. However, magnetic techniques are applicable only to ferromagnetic materials.Although there are many scientific articles describing the correlation of magnetic and mechanical properties, there are only few reports describing the determination of residual stresses via magnetic techniques. In addition, reports on predictions of the spatial distribution of the residual stresses in welded ferromagnetic samples are rather limited.The scope of the present dissertation was to correlate the microstructural features with both mechanical and magnetic properties in ferromagnetic welded steels, as well as to investigate the proper selection criteria for developing a suitable methodology for the accurate determination of residual stresses existing in welded parts.Magnetic non-destructive testing took place by the use of two magnetic non-destructive techniques: by the measurement of the magnetic Barkhausen noise and by the evaluation of the magnetic hysteresis loop parameters. All magnetic parameters were then correlated to microstructural characteristics, such as the volume fraction of the dominant phase and of microstructural constituents, the grains’ morphology, the distribution of the average grain size and the dislocations’ density. The results were commented on the basis of the response of mechanical properties, such as hardness, yield strength, ultimate tensile stress and elongation. The collection of such data had, of course, a catalytic importance to the effective and efficient characterization of welded samples in a non-destructive manner.Finally, the spatial distribution of residual stresses in welded metal parts by both non-destructive magnetic methods and two diffraction methods was determined. The conduction of magnetic measurements required an initial calibration of ferromagnetic steels. Based on the examined volume of the sample, all methods used were divided into two large categories: the first one was related to the determination of surface residual stress, whereas the second one was related to bulk residual stress determination.Τhe first category included the magnetic Barkhausen noise and the X-ray diffraction measurements, while the second one included the magnetic permeability and the neutron diffraction data.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Vourna, Polyxeni
  • Βουρνά, Πολυξένη

Subjects

dc:subject × 16

Rights

dc:rights
Statement dc:rights
  • BY_NC_ND
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/40809

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Vourna, Polyxeni; Βουρνά, Πολυξένη. Συσχέτιση μαγνητικών και μηχανικών ιδιοτήτων με μικροδομή σε συγκολλήσεις φερρομαγνητικών χαλύβων. National Technical University of Athens (NTUA), 2015. http://hdl.handle.net/10442/hedi/40809