Back to search

Democritus University of Thrace (DUTH)

Συμβολή των χαρακτηριστικών των αδρανών υλικών και των ασφαλτικών συνδετικών στην απόδοση ασφαλτοσκυροδεμάτων που χρησιμοποιούνται σε έργα οδοποιίας

Abstract

dc:description

In order to investigate the contribution of aggregates and asphalt binders to the performance of asphalt concrete used in road construction, a laboratory study was designed and carried out, in which various types of asphalt specimens were prepared in order to determine the properties of asphalt concrete, according to Marshall method. Two types of aggregates were used to prepare samples, crushed and natural aggregates, and four types of open-graded bituminous concrete with a maximum grain of 19 mm (¾ in.), 12.5 mm (½ in.), 9.5 mm (3/8 in.) and 2.36 mm (# 8) and one type of dense-graded asphalt, with a maximum grain of 19 mm (AS20) were prepared. In order to investigate the effect of the filler type and percent on the performance of asphalt concrete, aggregate dust, fly ash, lime and cement were used at various rates. For the preparation of all specimens of the different types of asphalt concrete, 50/70 asphalt was used at 4.0%, 4.5%, 5.0%, 5.5%, 6.0% and 7.0%, while three specimens were prepared for each asphalt percentage. Two methods, the Marshall method and the gyratory method were used for the compaction of the specimens.Angular and rough surface crushed aggregates gave higher stability values and lower deformations, compared to the rounded, smooth surface natural aggregates.Dense-type asphalt cements gave higher stability values and smaller deformations than open-graded ones. However, by comparing samples with open gradation, it was observed that the stability values decreased when the size of their maximum grain increased, while the values of the deformations also increased.Laboratory research has shown that modifying the asphalt mix by adding fly ash or cement as filler resulted in an increase in the stability values. For low asphalt percentage, the use of cement gives higher stability values, while higher stability values resulted when fly ash was used.The percentage of filler plays an important role in the stability of the compacted mixture. The addition of fly ash, cement or hydrated lime increases stability values, while further increases of the content percentages result in reduction of stability values.

Degree

thesis:*
Grantor dc:publisher
Democritus University of Thrace (DUTH)
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kalaitzaki, Elvira
  • Καλαϊτζάκη, Ελβίρα

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/41117

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kalaitzaki, Elvira; Καλαϊτζάκη, Ελβίρα. Συμβολή των χαρακτηριστικών των αδρανών υλικών και των ασφαλτικών συνδετικών στην απόδοση ασφαλτοσκυροδεμάτων που χρησιμοποιούνται σε έργα οδοποιίας. Democritus University of Thrace (DUTH), 2017. http://hdl.handle.net/10442/hedi/41117