Back to search

National Technical University of Athens (NTUA)

Αριθμητικές εφαρμογές καταστατικών προσομοιώσεων εντός του πλαισίου κρίσιμης κατάστασης εδαφομηχανικής με προσανατολισμένη δομή

Abstract

dc:description

Critical State Theory (CST) has been the dominant paradigm of a constitutive framework in the soil mechanics and granular material community, since its creation 60 years ago. It is the main framework for most constitutive models concerning granular media, and predicts the steady state that granular materials will reach after extensive deformation during “continued shearing”. This state will be called henceforth Critical State (CS). CST implicitly assumes that, at that state, the material has no important fabric, because it makes no reference to it; however, recent research suggests that a particular strong anisotropic internal structure exists and meaningfully impacts soil’s behavior. This work is primarily focused on the fabric of granular materials and, in particular, soil. Although soil’s internal structure, which we have come to call soil fabric, appears to be a key element in determining soil behavior, it started being widely researched only during the past two decades. Even though soil is a discrete medium, both in research and in practice, soil is usually modeled and analyzed based on continuum theories. This means that its internal grain structure, which determines soil’s macroscopic response in a crucial way, either is not accounted for, or it is represented by macroscopic internal variables of a continuous nature. Fabric and its relation to the mechanical response of sand was shown to be so vital, that 5 years ago a new theory has been presented (Anisotropic Critical State Theory – ACST) enhancing the classical CST by adding a fabric-related parameter, as a necessary step towards rendering the theory complete by incorporating in its premises the role of fabric. ACST has been successfully applied as a framework for constitutive modeling, and the addition of fabric in the ACST framework indeed adds great simulative capabilities to the models using it. Nevertheless, despite its increased accuracy and applicability, the necessity of this new theory as an enhancement of the classical CST had not yet been proved, until today. The reason for this is that very special experimental conditions must apply in order to test if the aforementioned modification of CST is necessary, since, in a simple, typical situation (e.g. classical triaxial compression load) CST appears to be complete. However, for different, more complex, but still natural and frequently occurring loading paths (e.g. stress principal axes rotation) it is very difficult to assess whether CST conditions are complete. In this work, Discrete Element Method (DEM) was used, a modern numerical method that can simulate a granular material at its discrete nature. Through a novel numerical experimental procedure, we conducted very specific 2-dimensional and 3-dimensional virtual experiments, and succeeded to prove that CST is indeed incomplete. The virtual sample was first brought to CS, and then stress Principal Axes (PA) rotation was imposed, keeping stress principal values fixed. The rotation induced void ratio reduction, thus, abandonment of CS, despite the fact the two CST conditions were satisfied at the initiation of the rotation process, since stress principal values were fixed and void ratio was at its critical state value. The recently proposed Anisotropic Critical State Theory (ACST) remedies this incompleteness of CST by enhancing its two conditions by a third one, related to the critical value of fabric anisotropy. This third condition is violated by the stress PA rotation and can explain the aforementioned void ratio reduction. An extra third phase, similar to the initial triaxial radial path of phase 1, is applied to the sample at various stages of phase 2. It is concluded that the void ratio undoubtedly rebounds to its CS value, along with the stress ratio which reaches a peak value and then, also falls to its CS value. ACST can also explain the response of the sample during the second and the third loading phases, features that classical CST cannot address, since it lacks fabric anisotropy consideration. These loading phases have been implemented and compared in 2 and 3 dimensions, providing qualitatively the same mechanisms while the 3D analysis also provides results quantitatively comparable with real sands. In conclusion, after the numerical experiment realized with the DEM, the three conditions of ACST are shown to be both necessary and sufficient for reaching and maintaining CS. In addition, the extra fabric condition proposed by ACST is verified, and ACST is proved to be a more complete and accurate theory for describing and predicting soil’s behavior.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Theocharis, Alexandros
  • Θεοχάρης, Αλέξανδρος

Subjects

dc:subject × 14

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/41166

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Theocharis, Alexandros; Θεοχάρης, Αλέξανδρος. Αριθμητικές εφαρμογές καταστατικών προσομοιώσεων εντός του πλαισίου κρίσιμης κατάστασης εδαφομηχανικής με προσανατολισμένη δομή. National Technical University of Athens (NTUA), 2017. http://hdl.handle.net/10442/hedi/41166