National Technical University of Athens (NTUA)
Εναπόθεση νανοσωματιδίων καθώς και συμπαγών λεπτών στρωμάτων αποτελούμενων από νανοσωματίδια και εφαρμογές τους σε ηλεκτρονικές διατάξεις
Abstract
dc:descriptionIn the past decades metal NPs and nanoparticles thin films (NTFs) with optimized morphology and structure have attracted significant interest in numerous research areas including catalysis, sensing, optics, data storage, biotechnology. In many applications the functionality of metal NPs is profoundly affected by their size, shape and structure. For example sharp edged shaped NPs reveal enhanced catalytic activity because they provide more active sites for catalytic reactions, the “small size effect” of metal-oxide nanoparticles increases remarkably the sensitivity of gas sensors, twinned silver NPs show important different chemical activity compared to their single crystalline counterparts. Concerning the nanoparticle composed films, their performance is affected, among others, by their porosity in combination with their mechanical properties. The availability of pores in metallic or metal-oxide NTFs and the tunability of their porosity, affects a set of properties like optical and electrical ones, as well as corresponding applications which can range from sensors, catalysis , energy storage. While an increasing number of applications of porous NTFs are proposed in the literature, at the same time the poor mechanical stability of these systems is a major drawback that prevents their widespread industrial use. The weak adhesive force between the nanoparticles leads to fragile coatings which tend to fracture under small loads, making them in many cases unsuitable for industrial use. Mechanical reinforcement is necessary to improve mechanical stability. In this context, an analytical study on Hf nanoparticles and nanoparticle thin films synthesis and structural characterization is presented. The first part describes the fabrication and characterization of hexagonal close packed Hf nanoparticles. Hf nanoparticles were fabricated by inert gas condensation method at room temperature. Inert gas condensation is a single step nanoparticles synthesis method in a high vacuum environment, with allows a high degree of deposition parameter control. By tuning the deposition parameters modification of size, shape, structure, of the nanoparticles can be achieved, thus NPs can be designed according to specific applications. In this study the structure, shape and size of Hafnium nanoparticles were characterized by combining X-Ray Diffraction, Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM). To our knowledge this is the first report of Hf NPs fabrication and characterization. The second part describes the fabrication and characterization of Hf nanoparticle thin films. The films were fabricated by energetic nanoparticle deposition. By controlling the kinetic energy of the nanoparticles upon landing on the substrate, we could tune the porosity and the mechanical properties of the porous nanoparticle thin films. We demonstrate this method with Hafnium nanoparticles but it can be applied to any metallic nanoparticles according to the desired application. We propose this single step method as an alternative solution, to reinforce nanoparticle thin films and produce mechanical stable porous nanoparticle thin films Furthermore we demonstrate this technique to fabricate 3-dimensional patterns composed of nanoparticles. The third part studies two applications of metallic nanoparticles. The first application concerns the behavior of titanium dioxide TiO2 resistive memory devices before and after the insertion of Hf nanoparticles. When Hf nanoaprticles embedded into the TiO2 oxide layer, a completely new behavior of resistive switching appears compared with pristine TiO2. In specific the volatility of these devices could be tuned by controlling the current compliance. The second application concerns the use of gold (Au) nanoparticles in biosensors applications. Au nanoparticles were used for silicon dioxide SiO2 surface modification. Then the immobilization and hybridization of complementary oligonucleotide chains (DNA) on the modified SiO2 surfaces was studied. In specific the hybridization and immobilization was studied in relation with the size and surface coverage of Au NPs and the best parameters, concerning the hybridization efficiency, were determined.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2017
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Michelakaki, Irini
- Μιχελακάκη, Ειρήνη
Subjects
dc:subject × 20- Τεχνική συμπύκνωσης αδρανούς αερίου
- Ενεργητική εναπόθεση
- Νανοσωματίδια Χαφνίου
- Νανοσωματίδια χρυσού
- Μαγνητική υποβοηθούμενη ιοντοβολή
- Μνήμες
- Περίθαση ακτίνων -Χ
- Μηχανικές ιδιότητες νανοσωματιδίων
- Inert gas condensation
- Energetic deposition
- Hafnium Nanoparticles
- Gold nanoparticles
- Magnetron sputtering
- Resistive memory
- X-ray diffraction
- nanoparticles mechanical properties
- Φυσικές Επιστήμες
- Φυσική
- Natural Sciences
- Physical Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/41405