Aristotle University Of Thessaloniki (AUTH)
Ανάπτυξη σύνθετων υλικών κράματος αλουμινίου 7075 με ιπτάμενη τέφρα και επίδραση των μεθόδων παραγωγής στις ιδιοτητές τους
Abstract
dc:descriptionThe objects of this work were: firstly to create a new metal matrix composite material, consisting of aluminum alloy AA7075 / fly ash and secondly to investigate the way that production methods affect the final product properties. The composites were manufactured following conventional industrial techniques (such as preform preparation, infiltration, stir casting, compocasting, squeeze casting) and they were subsequently hardened by an ageing thermal process (T6). Finally the composites were anodized by immersing into a sulfuric acid solution, while connected with a DC power supply. The microstructure of AA7075, fly ash and composites was examined in every stage of this work, giving emphasis to the changes that took place. Several physical and mechanical properties were measured such as: compression strength, Young modulus, Charpy test absorption energy, micro – macro hardness, linear thermal expansion coefficient, wear resistance and the corrosion behavior was investigated, before and after the anodizing process. A number of conclusions can be reached through this work such as: i) the creation of composite materials consisting of AA7075 and fly ash particles, ii) optimization of industrial production methods, iii) ageing thermal treatment process T6, iv) anodization as a surface protection, for some cases and final v) estimations, relative to the impact of production methods to the final composite properties, were gathered. In general from this work it can be concluded that: ALFA composites having a concentration of fly ash particles up to 10%vol. can be produced by stir casting techniques, where fly ash particles can’t be considered as a crystallization cell. The increase of the fly ash particle concentration in the composite results in a decrease of the metal matrix grain size. The particle dispersion within the composites is not uniform. For the preform production method an optimization methodology was evaluated taking under consideration the binder quantity, the wet cake compaction pressure, the porosity and the geometric characteristics of the infiltration molds and preforms. As the amount of fly ash particles increases, the hardness, the compaction strength, the Young’s modulus and the thermal expansion coefficient are reduced whereas the corrosion rate increases, even in the case of the anodizing protection process. Finally, the presence of fly ash in the composites enhances the homogenization and ageing procedure, when the optimum ageing hardness period is 12 hours.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2014
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kountouras, Dimitrios
- Κουντουράς, Δημήτριος
Subjects
dc:subject × 14- Σύνθετα υλικά
- Ιπτάμενη τέφρα
- Μέθοδοι παραγωγής
- Ιδιότητες
- Composite materials
- Fly ash
- Production methods
- Properties
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Engineering and Technology
- Mechanical Engineering
- Other Engineering and Technologies
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/41594