Back to search

Aristotle University Of Thessaloniki (AUTH)

Βέλτιστος σχεδιασμός μικρο-εναλλακτών θερμότητας

Abstract

dc:description

Scope of this thesis is to study the performance of μ-heat exchangers and to propose suitable and reliable design equations that can be used for the optimal design of μ-heat exchangers. During this PhD work, an experimental unit was designed and constructed in-house for assessing the thermal performance of a micro-heat exchanger. One more experimental unit was constructed for characterizing the fluid flow around a flow-disturbing rib in a micro-channel. In order to measure fluid velocity inside the micro-channel a μ-PIV system was used while an electrochemical technique was employed for the measurement of the wall shear rate. Additionally a general-purpose Computational Fluid Dynamics (CFD) code was used for the simulation of heat transfer in the micro-heat exchanger and the fluid flow around the rib. The results showed that the use of corrugated patterns in the micro-heat exchanger walls modifies the cooling liquid flow field and improves the performance of the heat exchanger. In several applications such as cooling a PEM Fuel Cell, the temperature distribution on the heat transfer surface of a heat exchanger has been revealed as a critical operating parameter. Using an RSM methodology the geometrical characteristics of the corrugations were correlated with the uniformity of temperature on the heat transfer surface. The resulted design equation was used to propose the set of the design variables (i.e. geometrical characteristics of the corrugation) that optimize the performance of the heat exchanger. The suggested values improved the uniformity of temperature on heat transfer surface up to 60%. For the case of the micro-channel with a flow-disturbing rib, different flow recirculation regions were identified depending on the geometrical characteristics of the conduit and fluid flow rate. The numerical results were found to be in good agreement with the experimental velocity profiles (μ-PIV measurements) and wall shear rate distributions (electrodiffusion diagnostics). Two new correlations were proposed for the prediction of the bottom reattachment length from the channel design parameters, based on the results of CFD simulations. The maximum error of the proposed correlation was calculated to be less than 15%. The results from the study of the fluid flow in the micro-channel were critically linked with the results from the thermal performance study in the micro-heat exchanger. It has been revealed that the geometrical characteristics that optimize temperature uniformity on the heat transfer surface are the same with the ones that maximize the reattachment length. The study of nanofluids as working liquids in the micro-heat exchanger device proved that the use of a 1% v/v SiO2 nanofluid increases the heat transfer coefficient up to 35%. By using the proposed nanoparticle suspension, it is possible to achieve the same operating temperature on the heat transfer surface using considerably lower (up to 20%) flow rate of the nanofluid compared to water used as the cooling liquid. This results to lower pumping power demand and to smaller equipment size. Finally, appropriate design equations are proposed for estimating the heat transfer coefficient and the corresponding pressure drop in such type of heat exchangers.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Stogiannis, Ioannis
  • Στογιάννης, Ιωάννης

Subjects

dc:subject × 12

Rights

dc:rights
Statement dc:rights
  • BY_NC_ND
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/41598

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Stogiannis, Ioannis; Στογιάννης, Ιωάννης. Βέλτιστος σχεδιασμός μικρο-εναλλακτών θερμότητας. Aristotle University Of Thessaloniki (AUTH), 2014. http://hdl.handle.net/10442/hedi/41598