Back to search

National Technical University of Athens (NTUA)

Πειραματική και αριθμητική μελέτη ρομποτικών συγκολλήσεων λεπτών ελασμάτων κραμάτων αλουμινίου της σειράς 5xxx

Abstract

dc:description

The design of a metallic construction that includes welding parts introduces special and specific difficulties. The presence of concentrated heat source, basically demanded for the welding of metallic elements, result adverse effects such as residual stresses, deformations, or metallurgical changes in the area of the welding seams. While these effects introduces major problems not only during the erection of the construction but also and mainly perhaps, during its function, it is essential all parameters that affect the welding, like the type of the material and its geometrical characteristics, the welding technique, the welding sequence, the mechanical constrains etc. to be defined, from the first steps of the design.Preparative to secure the best result, concerning reliability, which however can’t be independent from the final cost and time of completion, comprehensive knowledge of the transient thermal stresses, the thermal cycles, the final residual stresses and deformations, because of welding, is required. Furthermore, gaining deeper insight into the welding metallurgy, contributes towards the accomplishment of this target.Concerning marine and/or naval architecture, where talking about design and erection of a metallic construction that includes welding parts, primarily is meant the design and the construction of a ship or at least a ship’s superstructure, further demands like these enforced by the type of such a construction and the nature of the environment that functions must be take into account in the total puzzle. The complexity of the stresses formed on a ship because of the waves, the saltwater corrosive environment in which is exposed, the diversity in the form and nature of the carrying loads are factors that affect indeed its welding sections.Likely, the ideal status would be the creation of a total integrated system that includes and analyses all the parameters affect the behavior of the welded metallic construction. However, such a system demands significant cost and computational time.In the present Ph.D. thesis an experimental and numerical study of robotic welding of thin plates of aluminum alloys of 5000 series is curried out. The thesis is divided in four primal parts and a fifth which include general conclusions and other general approaches. While aluminum alloys are widely applied in marine and/or naval constructions just during the last 40 years, in the first part of the thesis, a brief presentation of the aluminum and its alloys is taking place in order to understand and underline its discrete properties as well as its differences from the primal marine alloy, the steel, which is dominating from the 16th – 17th century (transformation age from wooden to metallic ships) until today. Continuing to the same part of the thesis a study on the weldability of the aluminum alloys is taking place emphasizing to those techniques used in marine and/or naval constructions. Furthermore, welding problems and ways to avoid them, both in theoretical and empirical level, are underlined (i.e. edge preparation sequence before welding, welding equipment apparatus used etc.).Other three parts of the thesis are following which, in the order of presentation, dealing with the welding metallurgy and the welding thermal cycles – Part 2, the transient phenomena occurring during welding and the formation of residual stresses – Part 3 and finally welding simulation through thermo-mechanical finite element analysis via ABAQUS®. Simulated results are compared to the corresponding experimental data while a study on the effects on one hand of temperature-dependent material properties and on the other hand of the welding sequence on welding simulation results is also introduced.In each of the aforementioned three parts the theoretical background, the recent developments, the tools used, the results and of course the conclusions are introduced.Finally, as mentioned before in the fifth part, general conclusions and other general approaches concerning the thesis are introduced.In general, an integrated study concerning arc welding of marine aluminum alloys is introduced which is taking into account all the modern scientific approaches. Through this study, significant results come about that helps to fully understand the behavior of the marine aluminum alloys in arc welding while, can be used in the design of marine constructions leading to more reliable results.Due to particular and special welding parameters, concerning the experimental investigation of welding thin-walled aluminium alloys (high heat input and welding speed, large amount of different kind of distortions, difficulties in clamping the welding samples) the difficulties in the installation of sensors and measurement apparatus, recording different kind of data during welding, are significant resulting rarely encountered literature results similar to those of the present study. Thus, compared to the existing literature, a metallographic study of aluminium alloys of the 5xxx series welds, of thickness less than 6 mm, has been presented though, for the first time in such thicknesses, a study of transient thermal and mechanical phenomena occurring during welding of actual joints and not on bead-on-plate welds . Furthermore, for such thicknesses concerning aluminium alloy plates like those studied in this thesis, it is the first time that experimental results are compared to simulation results and mainly, it is the first time that the effect of welding sequence, on the deformation as even more in the distribution of the residual stresses due to welding is investigated through simulation procedure.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Chionopoulos, Stavros
  • Χιονόπουλος, Σταύρος

Subjects

dc:subject × 17

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/41609

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Chionopoulos, Stavros; Χιονόπουλος, Σταύρος. Πειραματική και αριθμητική μελέτη ρομποτικών συγκολλήσεων λεπτών ελασμάτων κραμάτων αλουμινίου της σειράς 5xxx. National Technical University of Athens (NTUA), 2014. http://hdl.handle.net/10442/hedi/41609