Back to search

Agricultural University of Athens

Designing emulsions and nanostructures for the encapsulation of bioactive compounds

Abstract

dc:description

This thesis aims to advance the understanding of emulsion production for the encapsulation of epigallocatechin gallate (EGCG). The motivation of this work was based on recent research, highlighting the significant consumer shift to healthier food products with different food structures. Therefore, ingredients such as whey protein and bacterial cellulose were used and processes like ultrasonication and electrospraying were applied.The first part of this thesis, aimed at finding the optimal emulsification procedure for emulsions containing BC and whey protein isolate (WPI). Emulsions were prepared using WPI and BC in various concentrations and were homogenized either by ultrasounds or by high pressure homogenizer. The lowest droplet size was found for the emulsions treated by ultrasounds (D50 = 600 nm). At lower BC concentrations, extensive aggregation between the oil droplets led to unstable emulsions due to bridging interactions. Higher BC concentrations resulted in stable emulsions, possibly due to the formation of a BC network between the oil droplets, which prohibited coalescence. These results confirm the greater efficiency of the US homogenization as compared to the HPH treatment in obtaining stable emulsions.The next part of this thesis, aimed at encapsulating EGCG into various emulsion carriers. Firstly, emulsions containing WPI and BC were produced. Two different catechins: hydrophilic (H-EGCG) or lipophilized (L-EGCG) were incorporated in the aqueous or the oily phase of the emulsions. At the optimal EGCG concentration the highest encapsulation efficiency of 85 ± 2% yielded with reasonable droplet diameter of 680 ± 10 nm. The EGCG that incorporated in the oil phase was the lipophilized one, L-EGCG. Moreover, the produced emulsions did not present any phase separation.As a second step, solution and emulsion electrospraying was evaluated as a method of encapsulating EGCG. Again, two different catechins, H-EGCG or L-EGCG, were encapsulated either in the aqueous or the oily phase of the emulsions in order to compare the antioxidants’ stability. Emulsion properties in terms of stability, droplet size, bulk and interfacial viscosity were studied combined with the evaluation of the properties of the produced particles, namely the morphology and size of the particles, the EE and the stability of the EGCG within the particles under different storage conditions: humidity, pH and temperature. Low emulsion viscosity combined with low oil droplet size and high stability yielded particles with the smallest diameters. Ultrasound homogenization combined with L-EGCG proved to be the most adequate combination, reaching EE up to 97%. The use of low RH (26-53%) and neutral or alkaline pH (6-9) are necessary for protecting EGCG in the particles. Emulsion electrospraying can be used as a promising technology for encapsulation in the food industry.All in all, incorporation of EGCG in food systems, could potentially lead to the commercialization of products with enhanced properties

Degree

thesis:*
Grantor dc:publisher
Agricultural University of Athens
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Paximada, Paraskevi
  • Παξιμαδά, Παρασκευή

Subjects

dc:subject × 20

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/41806

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Paximada, Paraskevi; Παξιμαδά, Παρασκευή. Designing emulsions and nanostructures for the encapsulation of bioactive compounds. Agricultural University of Athens, 2017. http://hdl.handle.net/10442/hedi/41806