National Technical University of Athens (NTUA)
Παραμετρικός σχεδιασμός, υπολογιστική προσομοίωση & διερεύνηση των περιθωρίων βελτίωσης της ευθείας & ανάστροφης λειτουργίας φυγοκεντρικών αντλιών
Abstract
dc:descriptionHydro turbines are hydraulic machines designed to harvest the hydraulic potential for energy production. However, in many cases the purchase cost of these machines, along with their controlling electromechanical equipment, is considered techno economically unattractive for the exploitation of small hydropower potential. For this reason, there has recently been a more systematic investigation of the ability to use pumps in reverse operation [Pumps-as-Turbines, PAT], which present considerably lower purchase cost than standardized hydro turbines with respective operating characteristics. Nevertheless, PATs demonstrate some serious disadvantages compared to hydro turbines, most importantly lower efficiency and difficulty in regulation.The current Thesis aims at conducting numerical analysis and study of the flow in direct and reverse operation of centrifugal pumps, developing parametric design methods and implementing optimization procedures with regard to maximizing PATs hydraulic efficiency. The tools employed for this investigation include a series of different algorithms which enable the parametric design of centrifugal pump geometries, a CAD commercial code for the construction of computational domains and the production of numerical meshes [Gambit], a CFD commercial code for the flow simulation and geometry evaluation [Fluent] and a general numerical optimization software [EASY].The parametric design methods were developed for the sections of impeller, spiral case and guide vane crown. Impeller design was based on the hydrodynamic theory, as well as on empirical data, in order to introduce different approaches concerning the geometry of the meridional channel and the 3D shape of the blades. Geometry parameterization of spiral case was created in order to adjust to the desired impeller/runner dimensions, while also ensuring smooth flow in its interior. Radial guide vanes crown was dimensioned considering the neighboring sections of the machine and designed using symmetric hydrofoils, controlling the opening with regard to vane relative angle. The above methods allow sufficient design flexibility with a relatively small number of design variables, and hence are appropriate for use in design optimization procedures for centrifugal pumps and PATs.Numerical investigation was initially conducted separately for the sections of impeller/runner and the spiral case of a centrifugal pump in direct and reverse operation, concerning a desired pumping BEP. For the direct operation, a series of reference geometries was produced with the corresponding design methods and their performance was studied. Subsequently, optimization procedures were conducted for the impeller geometry, aiming at maximizing hydraulic efficiency. The finally selected new geometries displayed sufficient adaptation to the desired BEP and also remarkable efficiency rise between 0,3% and 7,5% compared to their respective initial geometries.In reverse operation, the new impellers were considered as initial PAT runners. At first, the flow inlet conditions that are implemented by the spiral case geometry were studied. Then, three types of design configuration were examined, aiming at energy efficiency improvement. Two optimization procedures were conducted for redesigning the runner geometry and the adding of splitter blades in an initial PAT runner was studied. Finally, the insertion of a guide vane crown between the spiral case and an initial runner was examined, in order to regulate the incoming flow. Significant energy efficiency rise was achieved with all of the examined configurations, with the splitter blades standing out as the most promising one, due to the low extent of technical intervention required, as well as the ability to adjust in advance the reverse BEP.Furthermore, the flow field in the PAT sections for the cases and operating points examined above was also studied in the full, unified computational domain of the respective geometries, confirming the sufficient adaptation to the desired pumping BEP, the reliability of the partial numerical investigation and the considerable saving of computational resources achieved by this method. Moreover, the fluctuations of pressure and velocity fields over time, caused by the finite number of the rotating blades, were studied for the above cases, showing significant smoothing with all of the examined design configurations in reverse operation. Finally, the resulting values of PAT dimensionless parameters, which by definition correlate the BEPs of direct and reverse operation, where compared with the corresponding results obtained by the dominant statistic correlations of the literature, showing satisfactory agreement.The developed methodology of computational analysis and design optimization with regard to PAT operation was implemented on the redesigning of a standardized centrifugal pump impeller. The new impeller was constructed from synthetic material by 3D printing and its reverse operation was compared to that of the initial runner, by conducting experimental measurements in the facilities of the Laboratory of Hydraulic Turbomachines, NTUA [LHT/NTUA]. The new runner showed considerable total efficiency rise of about 6,5% in agreement with the improvement estimated by the numerical simulations conducted for the two runners, thus confirming the aptness of the developed methodology for industrial purposes. Furthermore, the design interventions in the initial runner require small scale adjustments in production design and materials, thus effectively maintaining the low production cost of a standardized pump.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2017
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Chrysovergis, Marios
- Χρυσοβέργης, Μάριος
Subjects
dc:subject × 6Rights
dc:rights- Statement dc:rights
-
- BY
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/41835