Back to search

Aristotle University Of Thessaloniki (AUTH)

Detailed vehicle modelling of state-of-the-art energy efficiency technologies

Abstract

dc:description

The present doctorate aims to: the development of a detailed test protocol for the generation of consistent and repeatable data for the validation of energy consumption of vehicle simulation models, the development of a template model topology, applicable to all conventional vehicles, to facilitate and guide the modeling process, the generation of a large pool of highly accurate simulation data which are being used for the development and validation of CO2MPAS tool, the analysis and quantification of the impact of WLTP introduction on the certification procedure compared to the old NEDC, the development of modeling approaches of state-of-the-art energy efficiency technologies in vehicle simulation models and to the development of a methodology for the calculation of CO2 emissions in real world driving conditions.For this reason the European vehicle fleet has been divided in characteristic segments as a function of transmission type, fuel type, displacement and engine aspiration type. A vehicle was selected for each one of the segments which was measured in the NEDC and WLTP protocols and for which a simulation model was developed in the Cruise software of the company AVL GmbH. The model validation has been conducted by comparing their results against their respective measurements for four different criteria that has been established by the European Commission in the context of “WLTP/NEDC Correlation exercise” research program. The developed vehicle simulation models combined with fourteen different energy efficiency technologies and a database has been developed which was used for the development and validation of CO2MPAS tool. Finally, the developed vehicle simulation models and their results were used in a scenario for the prediction of vehicle fleet average CO2 emissions for 2030 and to investigate their usage in a potential real-world driving type approval.Concluding, the dominant reason for the ΔCO2 between WLTP and NEDC was found to be the different inertia test mass and the applied driving resistance, Most of the investigated technologies have a larger average effect in NEDC rather than WLTP since manufacturers developed and optimized these technologies to comply with the NEDC legislation. Moreover, using a generic vehicle simulation model with data from public sources and the developed database it was shown that the real world fuel consumption simulation can be successful, the future composition of vehicle fleet cannot be predicted but rather only estimated due to its dependence on macro economy, CO2 regulatory framework, customer demographics etc. Finally, optimizations towards the new procedure by vehicle manufacturers will still be possible but yet, it is unclear how are they going to be adopted and what will their CO2 effect be.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Tsokolis, Dimitrios
  • Τσοκόλης, Δημήτριος

Subjects

dc:subject × 16

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/41946

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tsokolis, Dimitrios; Τσοκόλης, Δημήτριος. Detailed vehicle modelling of state-of-the-art energy efficiency technologies. Aristotle University Of Thessaloniki (AUTH), 2017. http://hdl.handle.net/10442/hedi/41946