National Technical University of Athens (NTUA)
Προσομοίωση πλημμύρας σε φυσικό ανάγλυφο για την εκτίμηση του πλημμυρικού κινδύνου
Abstract
dc:descriptionIn this thesis, a new two-dimensional (2D) hydrodynamic model is presented, named FLOW-R2D, which solves the 2D-SWE through the Finite Difference Method and a modification of the McCormack numerical scheme. The objective of the thesis is the development of a new paradigm for the estimation of the flood hazard and taking into account several special issues appearing during the 2D flood simulation in real world conditions. The model is extensively tested by nine benchmarking tests and the numerical results derived from each test are compared with analytical solutions, experimental data and field measurements. The benchmarking test phase is performed satisfactorily. The first special issue is the flood simulation in an urban environment. The most important parameter in this case is how the resistance caused by buildings or other structures is represented in the model. The most common methods for simulating the water flow among the various structures are evaluated based on the comparison of the numerical results of the model with the corresponding experimental data and by the computational time required for each method. Another special issue is the calibration of the various parameters required from the model in order to simulate a flood event. The computational cost of 2D hydrodynamic models does not allow the implementation of conventional or evolutionary optimisation techniques and therefore only the trial and error method was adopted. In various case-studies where the computational effort is excessive, even the trial and error method could not be applied at reasonable computational times, and therefore a special treatment was followed. Apart from the calibration process, a sensitivity analysis of the various parameters was also performed in order to investigate the uncertainty introduced to the numerical results. The evolution of this uncertainty with respect to time is also investigated but no clear trend was observed. Besides, a new, physically-based, explicit relationship, valid for all the regimes of the flow (laminar, turbulent and transition regimes), appropriate for open channel flow, for the f coefficient of Darcy-Weisbach equation is produced. Apart from this approach, a new three-parameter friction model was proposed, while the values of these three parameters are estimated for various materials. In the last sections of the thesis, the model is used in order to estimate the flood hazard in real world conditions. The originality of the present thesis is the 2D flood simulation in real world conditions and the address of the various aspects which appear when simulating the real world case studies. The lack of field measurements is a disadvantage for the calibration of the parameters required to the model. In order to overcome this lack of data, two alternative approaches may be used. The first one is the creation of databases of field measurements. The second one is the development of physically-based models in order to simulate various phenomena encountered during floods, in a more comprehensive way. Naturally, these two alternatives do not confront with each other.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2015
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Mpellos, Vasilis
- Μπέλλος, Βασίλης
Subjects
dc:subject × 15- Προσομοίωση πλημμύρας
- Δισδιάστατο μοντέλο
- Πλημμυρικός κίνδυνος
- Φυσικό ανάγλυφο
- Flood modelling
- 2D model
- FLOW-R2D
- Natural terrains
- Flood hazard
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Περιβαλλοντική Μηχανική
- Engineering and Technology
- Civil Engineering
- Environmental Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/42052