Back to search

University of Patras

Αντισεισμικός σχεδιασμός επίπεδων μεταλλικών διασυνδεδεμένων πλαισίων με χρήση τριών νέων μεθόδων

Abstract

dc:description

The present thesis deals with the expansion of three pioneering seismic design methods of Moment Resisting Frames MRFs, in plane steel eccentrically braced frames (EBFs) of one diagonal per bay or chevron configuration, and also in plane steel frames, equipped with buckling restrained braces (BRBs) of chevron configuration. The first proposed method of seismic design utilizes modal damping ratios, while the second makes use of modal strength reduction factors resulting from the corresponding modal damping ratios. The basic idea of first two design method is related to the creation of an equivalent linear MDOF structure that is able to respond in a similar way to the corresponding non-linear original one, for a certain seismic excitation. The equivalent linear structure is of the same mass and linear stiffness as the corresponding non-linear one, while modal damping ratios ξj correspond to the first four modes of significance, and quantify the work of all non-linear deformations. At first, 98 plane frames are designed according to EC3 and EC8 by making use of an elastic spectrum that corresponds to soil category B and PGA equal to 0.24g, and is reduced by force reduction factor equal to 4. After that, the before mentioned frames were subjected to non-linear dynamic analyses by making use of 100 far fault seismic excitations that correspond to first four soil types (A,B,C and D) according to EC8’s categorization. These 100 seismic excitations are scaled in such a way as to induce certain damage levels in terms of inter- storey drift ratio (IDR) and local ductility of the frame members (μ). According to SEAOC, target damages are linked with various performance levels. As a next step of the procedure, modal damping ratios that correspond to first four modes, are calculated in conjunction with IDR and local ductility. The calculation is achieved through a repetitive transformation of the absolute value of an expressed in frequency domain transfer function of the structure, until it satisfies certain smoothness criteria, while systems linear damping ratio increases incrementally. A completely smooth shape of the transfer function indicates that the original non-linear structure has been converted to an equivalent linear one, and the modal damping ratios can be obtained through a solution of a non-linear system of equations. Subsequently, design equations are produced, from which someone can easily obtain the corresponding modal damping ratios ξj. Additionally, elastic absolute spectra of the given excitations and for every damping ratio are constructed in order to produce the corresponding absolute modal strength reduction factors qj for the first four significant modes. With an appropriate procedure, the absolute modal strength reduction factors converted to modal strength reduction factors that correspond to elastic pseudo-spectra, in such a way as to keep up with the EC8’s provisions about seismic design. Due to scaling of seismic excitations, not only modal strength reduction factors but also modal damping ratios, are linked with certain damage/performance levels. Finally, seismic design loads obtained in a frame of spectral analyses. A thrird method of seismic design entitled «Hybrid Force/Displacement method» is presented in herein. The second proposed method combines advantages of both force based and displacement based design. The main idea is related to the assessment of total ductility of a structure through the evaluation of maximum displacement of the top, at a vi certain target damage/performance level. Finally, total ductility expressed in conjunction with the corresponding strength reduction factor. The same designed frames as the first proposed method are subjected to the abovementioned 100 seismic excitations, where with the appropriate scaling, various target damage/performance levels are achieved. A frame reaches a target damage/performance level right after a member develops maximum permitted local ductility or when maximum inter-storey drift ratio is equal to target limit. Maximum displacement of the top of a frame is calculated ether at a maxim inter storey drift ratio u max(IDR) , or right after local ductility of a member reaches a limit value u max(μ). Maximum design displacement of the top u max(d) , is equal to the lower value between u max(IDR) and u max(μ) . Subsequently, maximum displacement ductility of the top μ Δ is evaluated as the ratio of maximum design displacement of the top u max(d) over the displacement of the top right after the formation of the first plastic hinge (first yield) u ry . The values of strength reduction factor for every seismic excitation considered equal to the ratio of a scale factor that leads to a target damage/performance level, over the corresponding scale factor at the time that the first plastic hinge appears. Also, relationships between strength reduction factor and max ductility of the top are extracted. Every single strength reduction factor calculated through the procedure of the Hybrid Force/Displecement Method, is constant for all mods, and can easily combined with the elastic spectrum of EC8 with respect to spectral analysis. Finally, via indicative numerical examples, a comparison between design according to EC8 provisions and the proposed methods takes place.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kalapodis, Nikolaos
  • Καλαπόδης, Νικόλαος

Subjects

dc:subject × 10

Rights

dc:rights
Statement dc:rights
  • BY_NC
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/42085

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kalapodis, Nikolaos; Καλαπόδης, Νικόλαος. Αντισεισμικός σχεδιασμός επίπεδων μεταλλικών διασυνδεδεμένων πλαισίων με χρήση τριών νέων μεθόδων. University of Patras, 2017. http://hdl.handle.net/10442/hedi/42085