Back to search

National Technical University of Athens (NTUA)

Ανάπτυξη υβριδικών (οργανικών/ανόργανων) τρανζίστορ με την τεχνική απευθείας εγγραφής με laser

Abstract

dc:description

The use of organic materials in electronic devices represents the next generation of technology, enabling cheaper manufacturing process, and offering the capability to use flexible substrates. In this work, the printing of both thin film organic semiconductors and inorganic materials, in liquid or solid phase, was achieved by means of a direct-write method (Laser Induced Forward Transfer technique – LIFT), in order to fabricate organic thin film transistors (OTFT).In LIFT, part of a material is transferred from one substrate (donor) onto another (receiver). More precisely, when the donor is irradiated with one pulse, the ejection and transfer of part of the material from the donor to the receiver takes place. With this method, precise patterns defined by the shape of the laser beam can be produced in solid phase.In addition, LIFT technique allows a wide range of fluids to be transferred including low viscous fluids to highly viscous fluids, also known as pastes (> 100 Pa.s). With this technique, it is possible to print complex structures from a wide range of solutions and the use of toxic solvents is minimized, resulting in reduced environmental impact and manufacturing costs. One of the most interesting properties of metallic nanoparticle inks is that metal NPs show a drastic reduction in their melting point which is crucial for their use with flexible substrates.The research topics of this thesis can be divided into two sections.In the first part, solid phase LIFT technique was used for the selective deposition of organic semiconductor materials on hybrid substrates (metallic contacts/silicon dioxide (SiO2) of 100 or 300 nm thicknesses/doped silicon (Si)) for the fabrication of Bottom Gate and Bottom Contact (BG-BC) organic transistors (OTFT). In particular, the printing of micro-patterns of semiconductive polymeric materials was tested including: i) regioregular poly (3-hexylthiophene) known as P3HT; ii) Poly (3,3'-didodecyl quarter thiophene) known as PQT-12; iii) Poly(2,5-bis(3-hexadecylthiophen-2-yl)thieno[3,2-b]thiophene) known as PBTTT with aim to fabricate functioning hybrid OTFTs where the printed polymer will act as the active channel. It was found that by using the LIFT technique there is no apparent damage to the substrate or electrodes. The fucntional transistors yielded mobility values up to 2.6×10-2cm2/Vs.Moreover, the printing of multilayer patterns (metal / organic dielectric / organic semiconductor) was studied for the fabrication of Top Gate and Bottom Contact organic transistors. Subsequently, morphological and electrical characterization of the printed devices was carried out to test and confirm their functionality.The second part of the thesis, focused on the study of the printing of metallic nanoparticle (Copper) inks, by means of liquid phase LIFT, on rigid SiO2 / Si, as well as flexible substrates for the formation of source and drain electrodes for organic transistors. More precisely, the laser transfer / printing process of a liquid comprises a series of fluid dynamics concepts that describe and illustrate the fluid jet behavior (evolution) and hence the printing conditions. High-speed and time-resolved shadowgraphic imaging experiments were performed in order to visualize the transfer mechanism and identify the optimal parameters for controlled printing of such inks. According to the experimental results, ejection/printing of inks can be categorized into three main regimes: (i) non-transfer to the receiver substrate; (ii) localized high resolution droplet printing; (iii) printing of irregular structures.Furthermore, printing of more complex patterns such as lines or interdigitated structures of copper ink was also examined in order to optimize printing resolution. Finally, a sintering process was conducted on the printed patterns in order to increase their conductivity, and the lowest specific resistance measured was about 40 times that of the value given by the supplier.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Makrygianni, Marina
  • Μακρύγιαννη, Μαρίνα

Subjects

dc:subject × 6

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/42567

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Makrygianni, Marina; Μακρύγιαννη, Μαρίνα. Ανάπτυξη υβριδικών (οργανικών/ανόργανων) τρανζίστορ με την τεχνική απευθείας εγγραφής με laser. National Technical University of Athens (NTUA), 2017. http://hdl.handle.net/10442/hedi/42567