Back to search

National Technical University of Athens (NTUA)

Μελέτη επιφανειακών κραματώσεων σε χαλύβδινα υποστρώματα με συγκεντρωμένη ηλιακή ενέργεια

Abstract

dc:description

Within the present thesis, the investigation is to examine and analyze the possibility of successful use of Concentrated Solar Energy (CSE) in the surface modification of materials and more specifically, in the formation of alloying on the surface of different steels.In more specific, within present work, the concentrated solar energy was applied to the melting of pre-deposited powders and existent coatings on different steel substrates, aiming at the formation of alloying with qualitative microstructural characteristics, well adhered to the substrate, which will perform good friction behavior and wear resistance. The post treatment of already formed (by other techniques) coatings, which was also conducted, by melting them with concentrated solar energy aimed at the improvement of these coatings basic characteristics : adhesion to the substrate, elimination of morphological distortions, increased micro-hardness, homogeneous chemical composition, and finally, improved resistance to friction and wear.All the materials examined within this work, as substrates and powders in pre-deposition, and all their combinations, were chosen based on the fact that they are widely applied in many different fields in the industry; therefore, they are very often referred to the most recent literature of the formation of surface alloying. In more specific each one of the following three different types of powders: the ceramic SiC, the cermet WC-17Co and the metallic Molubdenum based, “Amperit“ is pre-deposited on each one of the following steels: common steels St52.3, Ck60 and stainless steel 304L and treated with Concentrated Solar Energy. Thorough examination of the treated zones obtained, showed that in almost all of the cases, the solar treatment resulted in: deep alloyed zones well adhered to the substrate, increased grade of dilution of the powders or existent coatings, with no presence of cracks or worth mentioned pores or other discontinuities, the hardness is in every case at the very least 100% increased, compared to the substrate,friction and wear behavior are in all cases advanced and enhanced. The type of installations employed, along with the study of the influences of the experimental parameters’ deviation on the quality of the final product, make the solar treatment controllable and therefore repeatable, and followingly able to be optimized. To end with, an arithmetic model is built by means of COMSOL Multiphysics software 5.0,in order to reproduce the temperature field developed. The results are in good agreement to the experimentals. As for the innovation that is being introduced with the fulfillment of this thesis, it is self-evident that the energy source, the CSE, employed for conducting all the experimental work, is unique and pioneering to the field of surface treatments and in specific, the testing of all the substrates, pre-deposited powders and other coatings, used here.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Gkriniari, Anna
  • Γκρινιάρη, Άννα

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/42765

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Gkriniari, Anna; Γκρινιάρη, Άννα. Μελέτη επιφανειακών κραματώσεων σε χαλύβδινα υποστρώματα με συγκεντρωμένη ηλιακή ενέργεια. National Technical University of Athens (NTUA), 2015. http://hdl.handle.net/10442/hedi/42765