National Technical University of Athens (NTUA)
Κατασκευή, χαρακτηρισμός και ιδιότητες σύνθετων διηλεκτρικών υλικών πολυμερικής μήτρας
Abstract
dc:descriptionΙn recent years, a new generation of composite materials has attracted world’s scientific interest. More specifically this interest leads to the study and manufacture of ceramic-polymer composites including ferroelectric crystal particles in the nano-scale. This type of composite materials has a lot of interesting electric properties, which can find application in a lot of technological sectors and in various uses, such as sensors of temperature, energy storage capacitors, actuators of smart materials, electromagnetic interference (EMI) shielding and electrostatic dissipation (ESD) of charges, time delay electrical switches are some of the various uses in microelectronics. Based on this fact, the tendency to promote the investigation of such materials is justified. As far as the selection of nano-scale (particles less than 100nm), this has to do with the fact that whichever material in nano-scale, has unique properties and commonly quite different and attractive, in comparison with a material in bigger scale dimensions, such as bulk materials. This occurs due to large interface and the phenomena that are related with it. Of course this selection process depends on the specific case and the specific application, where the material should be operative. The ceramic inclusions might possess other additional interesting properties, as for example they could be piezo- and/or ferro-electric crystals or might exhibit pyro-electric behaviour. Such properties can lead to additional possibilities and functional behavior in the composite material’s performance, opening thus new horizons in the use of such advanced composite and simultaneously ‘smart systems’. In this Doctorate Thesis (Ph.D.), initially various kinds of different types of polymers were synthesized and then through these different types of polymer matrix composites were produced. Polymers that have been used as matrices were either synthesized in vitro or were supplied from trade. These polymers belong to the most important and most widely used categories of thermosetting polymers. Specifically polymers that have been used as polymer matrices in composites, belong to phenol-formaldehyde resins (particularly to novolacs), unsaturated polyester resins as well as epoxy resins. As far as novolac is concerned, in vitro synthesis took place, while concerning epoxy resin a commercially type has been supplied (a special type for electronic and electrical applications). Regarding to unsaturated polyester resins, five different compositions’ polyesters were synthesized in vitro based on the following raw materials: ethylene glycol, maleic acid, adipic acid and phthalic anhydride as well as another commercial type of unsaturated polyester resin, which has been supplied. The above eight different polymer resins were combined with ceramic barium titanate nano-particles, as an additive from 3% to 20% w/w. The method that has been used for the construction of the thermosetting matrix polymer composites and barium titanate was the compression hot molding technique. Afterwards all cured composite specimens were studied with regards to their structure, their thermal response as well as their mechanical and dielectric properties. The main reason why these certain kinds of individual phases were selected for the development of the composite materials is due to the fact that they have not previously been prepared and studied. The aim of this Doctorate Thesis is not only to study the synthesis-polymerization of the previously mentioned in vitro thermosetting polymer resins, but also to develop the composite materials and to study and characterize their structure, their thermal response and their mechanical and dielectric response. To begin with, a study and characterization of nano-composites’ structure took place via a number of different methods, where the type of the lattice, the identification of certain chemical bonds, the topography of the surface and the dispersion of nano-particles are examined in each polymer matrix. Subsequently regarding to the thermal response of the composites, the highest thermal strength was exhibited by novolac matrix composites, afterwards specimens with epoxy polymer matrix followed by lower thermal strength values and finally composites with polyester polymer matrix were placed. According to glass transition temperature, its’ value increases in some composites, while the content in barium titanate also increases. On the other hand, in some other composites the opposite behaviour is occurred. All the developed composites exhibited reduction of their mechanical strength values with increasing content in barium titanate, both in shear and bending tests. Regarding to the type of the specimens’ failure, some of them exhibit brittle behavior, while composites with laboratory unsaturated polyester polymer matrices exhibit elastomer type of failure, a characteristic that might seem really attractive to potential applications of such composites, for example in form of cables. As far as dielectric properties are concerned, these are the most important measurements for this specific kind of polymer composites, because the main purpose of adding barium titanate is to achieve energy storing capabilities and piezoelectric, pyroelectric and ferroelectric properties. Dielectric measurements were performed as a function of two variables, such as frequency and temperature. More specifically, the frequency band ranges between 10⁻⁶-10⁶Hz, while temperature ranges from room temperature to the highest temperature that each polymer could resist (temperature value that have been emerged through thermal analysis). In some specimens the study took place from -100°C to the highest resistance temperature, in order to study dielectric behavior in low temperatures (beneath room temperature). Phenomena-relaxations that have been identified via dielectric spectroscopy are α, β and γ relaxation, as well as interfacial polarization. With reference to the alternating conductivity (a.c.) the composites exhibited values range from 10⁻¹⁵ S/cm to 10⁻⁵ S/cm, and as a consequence composites are characterized as insulators among the biggest range of temperatures and frequencies. These composite materials could be used as sensors or actuators in smart materials, since barium titanate nano-particles are appropriately activated. On that occasion, they may display piezoelectric, ferroelectric and pyroelectric properties, which are very useful and desirable in such applications. The study which completes the Ph.D., is the calculation of the energy storage capability of all the developed composites and the comparison between them, therefore very useful information could be obtained concerning to the implementation of these composites as capacitors.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2015
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Asimakopoulos, I.
- Ασημακόπουλος, Ιωάννης
Subjects
dc:subject × 20- Σύνθετα υλικά
- Πολυμερική μήτρα
- Νανο-τιτανικό βάριο
- Μελέτη και χαρακτηρισμός δομής
- Κεραμικό πρόσθετο
- Νάνο-σωματίδιο
- Θερμοσκληρυνόμενο πολυμερές
- Διηλεκτρική εφαρμογή
- Composite materials
- Polymer matrix
- Dielectric application
- Nano-barium titanate
- Study and characterization of structure
- Ceramic inclusion
- Nano-particles
- Thermosetting polymer
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/42838