National Technical University of Athens (NTUA)
Πειραματική και θεωρητική διερεύνηση της μηχανικής συμπεριφοράς ινοπλισμένου σκυροδέματος
Abstract
dc:descriptionThis thesis deals with the mechanical behaviour of fibre-reinforced concrete by using three different fibres, hooked-end steel fibres, polypropylene micro- and macro-fibres. These three types of fibres were chosen to have different length, so that their contribution in different deformation stages of fibre reinforced concrete specimens is investigated. For this purpose six fibre reinforced concrete mixtures were produced with fibre volume fractions of 0.5% and 1.0% by volume of concrete using only one type of fibres in each mixture and three hybrid mixtures with fibre volume fraction of 1.0% by volume of concrete combining the three types of fibres per two. The efficiency of each fibre reinforced concrete mixture was based on the comparison with a plain concrete mixture.The comparison was made at room temperature, as well as at the temperature of 280°C. The latter temperature is the one that is reached at the interface of the passive fire-protection and the fibre reinforced concrete, when it is subjected to thermal stress in accordance with the worst fire scenario of Rijkswaterstaat curve (RWS) and in accordance with international experimental data. The heating rate was equal to 2°C/min until reaching the target temperature, namely 280°C, which was maintained for 30 min and the samples remained in the oven for one day to gradually cool down until the time of testing. The determination of the mechanical characteristics was performed by three testing methods, namely (a) uniaxial compressive test, (b) three-point bending test, and (c) double-punch test (Barcelona test), by means of which, the strengths and modified toughnesses, after reaching the peak load, were calculated. A total of 3 specimens were produced for each test, mixture and temperature, so as to extract average values of the mechanical characteristics of each case. Moreover, acoustic emission signals were being recorded for a further understanding of the fibre reinforced concrete fracture mechanism. For this purpose, eight piezoelectric acoustic emission sensors were placed to each specimen and all signals that were produced during testings were recorded. Furthermore, the number and characteristics of the signals produced of each fibre reinforced mixture were compared. In particular, average frequency and peak amplitude of the signals were investigated. Additionally, the signals were divided in 6 different stages based on the load and the displacement for a more detailed analysis. Finally, empirical equations determining the total circumferential opening displacement in Barcelona test using the mechanical characteristics of the fibres and the axial displacement were produced. The purpose of these equations is to simplify the test by measuring only the axial displacement without the necessity of complicated and expensive lab equipement.According to the experimental results of this thesis, an optimal choice of fibre combination is proposed for producing fibre reinforced concrete comparing only mechanical properties. This choice is mainly based on the ductility capacity after achieving the peak load for both temperature conditions.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Choumanidis, Dimitrios
- Χουμανίδης, Δημήτριος
Subjects
dc:subject × 14- Ινοπλισμένο σκυρόδεμα
- Δοκιμές σε θερμοκρασία περιβάλλοντος και σε υψηλή θερμοκρασία
- Δυσθραυστότητα ως δείκτης κατηγοριοποίησης
- Υβριδοποίηση
- Καταγραφή σημάτων ακουστικής εκπομπής
- Fibre reinforced concrete
- Tests at ambient and elevated temperature
- Toughness as classification index
- Hybridization
- Recording of acoustic emission signals
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Engineering and Technology
- Civil Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/42839