National Technical University of Athens (NTUA)
Determination of failure criteria and incorporation in FE codes for the simulation of ship’s hull in extreme loading conditions
Abstract
dc:descriptionThe object of the thesis is the definition of a numerical procedure for the finite element (FE) simulation of the response of ship structures under accidental loading conditions in a realistic manner. In particular, focus is placed on the investigation of the effect of material modeling, i.e. material curve in combination with a rupture criterion, as well as of the strain-rate effect and the mesh size on the assessment of the strength of the ship structure and on the prediction of the damage patterns that occur during the event. In general, FE simulations of accidents aim either in the prediction of the crashworthiness of a ship structure in terms of load carrying capacity or in terms of energy absorption capacity versus the extent of the damage, or in the prediction of the damage when one or two vessels are involved in a given impact scenario.In order to define an appropriate modeling technique, twenty three tests that are reported in the literature are simulated. The tests that were selected for the benchmark study are representative of the modes of damage that occur in ship impacts, i.e. bending, stretching, tearing under in-plane loads, buckling, crushing and curling. Further, the selected tests were performed on models having thicknesses from 3 to 20 and were loaded beyond their maximum load carrying capacity quasi-statically and dynamically-one test.The true stress-strain curve is determined from uniaxial tensile tests until necking, whereas different representations are investigated for the post-necking region. Three rupture criteria are considered for the simulation of the initiation and propagation of rupture. These are a criterion based on the equivalent true plastic strain (Marinatos and Samuelides 2013a, 2013b and 2015), which is referred as SHEAR due to a critical change in the shape of the element that precedes rupture, the BWH instability criterion (Alsos et al. 2008) and the RTCL damage criterion (Törnqvist 2003). The behaviour of these criteria as well as of other criteria that are reported in the literature is investigated to identify the reasons that they produce different results when applied for the prediction of rupture under plane stress conditions.Following the benchmark study and the investigation of the parameters that affect the behavior of the criteria, it is recommended to use a criterion based on a critical equivalent true plastic strain, i.e. SHEAR criterion, with a cut-off value of triaxialities equal to -1/3 below which the criterion is not activated in combination with a powerlaw material curve and an element length over thickness ratio between two and four, i.e. 2 4. The recommendation is appropriate for the simulation of ship impacts using FE codes in association with plane stress elements.Such a numerical simulation technique may be employed for the investigation of innovative structural configurations of ship structures that may resist impacts and the assessment of the crashworthiness of the structures in the framework of an Accidental Limit State (ALS) analysis that includes the determination of residual strength, stability and oil outflow in damaged conditionIn the present work, the simulation tool has been used to investigate the effect on the extent of damage that occurs on the side of a ship structure when she is struck by a deformable bow. The analysis revealed that the assumption of a rigid bow not only imposes higher loading, in terms of energy, to the ship that is struck by a bow, but it also has a substantial effect on the geometry of the contact area between the colliding ships and consequently on the prediction of the damage that occurs during a collision scenario.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2015
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Marinatos, Ioannis
- Μαρινάτος, Ιωάννης
Subjects
dc:subject × 23- Ισοδύναμη πλαστική παραμόρφωση
- Ακραία φορτία
- Μοντελοποίηση του υλικού
- Πραγματική καμπύλη τάσης-παραμόρφωσης
- Κριτήρια αστοχίας σε μη γραμμικούς
- Κώδικες πεπερασμένων στοιχείων
- Πειράματα διείσδυσης
- Επίδραση πλέγματος διακριτοποίησης
- Επίδραση ταχύτητας
- Equivalent plastic strain;
- Extreme loading
- Material modeling
- True stress-strain curve
- Rupture criteria in non-linear FE codes
- Indentation tests
- Mesh size effect
- Strain rate effect
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική Υλικών
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Engineering and Technology
- Materials Engineering
- Other Engineering and Technologies
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/42901