Aristotle University Of Thessaloniki (AUTH)
Διερεύνηση της ρεολογίας λιπαντικών σε συνθήκες ελαστοϋδροδυναμικής λίπανσης και εφαρμογή στον υπολογισμό του βαθμού απόδοσης κυκλοειδών μειωτήρων
Abstract
dc:descriptionImproving the efficiency of power transmission systems is a major demand in a variety of applications aiming to reduce consumption, temperature and overall operational cost. To evaluate the effect of design parameters and of the lubricant selection it is necessary to use tools for calculating the tribological conditions and simulating the lubricant behaviour in the contact.. Despite the development of powerful computational systems and the improvement of the algorithms in terms of stability and speed, the accuracy of the result is limited by the accuracy of the rheology model used and the validity of its parameters. In the recent years in the field of tribology, there is an ongoing "fitting" race of simulation results to experimental data through parameter manipulation. The significance of those parameter values is limited due to being extracted from a set of experiments which is also used as a comparison for the simulation results. The goal of the present thesis is to directly extract rheology parameters from experimental measurements of friction without recursive correction from simulation results, hence extending the scope of application beyond a specific test rig and a specific set of experiments. In the process of evaluating the lubricant behaviour, it became apparent that the variation of the limiting shear stress value can be expressed by a new simplified equation. The new equation and the calculated rheology parameters are used in a new generation Thermal-Elastohydrodynamic numerical solver. Experimental measurements in two different test rigs under different tribological conditions show good agreement with the simulation results for friction. As a next step, the results of the calculated rheology values for two reference mineral-oils are put into test in a complex power transmission system, the cycloid reducer. The sig-nificance of accurate modelling of the limiting shear stress is studied in terms of the calculated friction if an error in the parameters is assumed. Cycloid reducers are planetary systems with a trochoid flank curve that offer advantages such as zero backlash, very small fluctuation of torque and ratio coupled with very high reduction ratios and high power density. These aspects make them a good contestant for highly demanding applications such as robotics. The comparably lower weight of the reducers and the high overload capacity makes them also attractive in personal mobility applications. Tribologically, they present an interesting case due to the high-power density, limited oil or grease supply in conjunction with high normal pressure. In order to apply friction simulation and the aforementioned rheology model, the tribological condition must be evaluated. In this thesis, the kinematic analysis of different configurations is performed. Software tools are developed and used to design and analyse the reducers. The results concerning normal stresses are compared to those obtained using the Finite Element Method. The workflow tools produce input files and utilize the numerical EHL solver. The friction results are used for the calculation of the total power loss. By adjusting the design parameters optimal parameters can be selected for minimizing the power loss and improving the reliability of the reducers.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2017
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Athanasopoulos, Emmanouil
- Αθανασόπουλος, Εμμανουήλ
Subjects
dc:subject × 18- Ρεολογία
- Προσομοίωση ελαστοϋδροδυναμικής λίπανσης
- Κυκλοειδης Μειωτήρες
- Συντελεστής τριβής
- Βαθμός απόδοσης
- Οριακή διατμητική τάση λιπαντικού
- Rheology
- Elastohydrodynamic lubrication simulation
- Cycloid reducers
- Friction coefficient
- Power efficiency
- Limiting shear stress
- Zykloidengetriebe
- Eyring stress
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/42992