Back to search

University of Ioannina

Σύνθεση επικαλύψεων υψηλών θερμοκρασιών με τη νέα μέθοδο CAFSY

Abstract

dc:description

The synthesis of alloys using the novel CAFSY method (Combustion-Assisted Flame SpraYing) combines two different methods, the Self-propagating High temperature Synthesis(SHS) and Flame Spraying (FS). During CAFSY the initial mixture of base metal powders isintroduced into the flame during normal thermal spraying and self-ignite and reactexothermically during the flight stage producing in-situ intermetallic coatings on the substrate.The CAFSY method introduced in this thesis is a new approach to the synthesis ofintermetallic coatings that has never been used before either in an industrial or research level.The exothermic reactions during flight increase the available energy thereby reducing therequired reaction time between Ni and Al (studied in this work), rapidly synthesising theintermetallic compounds NiAl and Ni3Al. An additional important advantage is thesignificantly lower cost of producing hard coatings by this method, since Ni and Al powdersare widely commercially available so there is no need to use the expensive pre-alloyedpowders generally used for the thermal spraying.In this study the fabrication of various compositions of Ni-Al intermetallic coatingswas carried out by the CAFSY method. Because of the originality of the method, none of theusual parameters of normal thermal flame spraying can be taken for granted, so the effect ofdifferent spraying parameters on the properties of the produced coatings has been studiedextensively. The processing parameters studied are: the role of PVA as a binder for theagglomeration of the powder, the prior mechanical processing of the initial powder mixtures,the effect of powder size and distribution of Al, the composition of the initial powder mixturein Ni and Al, the air supply during thermal spraying, the thermal spraying distance, the flametemperature, the substrate temperature and heat treatment of the coating and substrate materialafter spraying. In most cases, the coatings fabricated using CAFSY were compared with theconventional method of thermal spraying process. This study has shown that, in addition tocompositional control, CAFSY offers the capability to control the combustion reactionsbetween the initial powders during flame spraying. Overall, the study has shown that theCAFSY method produces high quality coatings with low porosity (<3%) with a coherentstructure and good adhesion strength (>40MPa). The proportion of intermetallic phases formedin the coatings can reach up to 95% of its total mass, depending of the spraying conditions.The majority of coatings produced by CAFSY exhibit excellent erosion resistance. Thelow porosity appears to be the main factor for increasing the erosion resistance. Also,important role in determining the erosion resistance play the amount of intermetallic phasesNiAl, Ni3Al, Ni2Al3, NiAl3 present in the coating as well as the amounts of remanent Ni andAl. The results of extensive corrosion experiments have shown that the Ni-Al coatings produced by the CAFSY method exhibit similar electrochemical behaviour to those producedby pre-alloyed powders and are not significantly affected by the parameters of thermalspraying. Although the conventional coatings display better behaviour to general corrosionthey have a low susceptibility to pitting. On the other hand, the Ni-Al coating produced usingCAFSY under optimized conditions do not high exhibit susceptibility to pitting corrosion

Degree

thesis:*
Grantor dc:publisher
University of Ioannina
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Marinou, Amalia
  • Μαρίνου, Αμαλία

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/43022

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Marinou, Amalia; Μαρίνου, Αμαλία. Σύνθεση επικαλύψεων υψηλών θερμοκρασιών με τη νέα μέθοδο CAFSY. University of Ioannina, 2015. http://hdl.handle.net/10442/hedi/43022