University of Ioannina
Ionic liquid modified porous materials and membranes for gas separation applications
Abstract
dc:descriptionSupported ionic liquid phase (SILP) systems have lately attracted a great deal ofattention because of their potential to circumvent two major problems, namely:1) the large quantity of ionic liquid usually needed to render viable a catalytic or separation process, which increases the cost of the application due to the high price of the ionic liquidsolvents2) the high viscosity of ionic liquids inducing mass transfer limitations which are morepronounced in the case of fast chemical reactions. In these cases, the reaction takes place onlywithin the narrow diffusion layer and not in the bulk of the ionic liquid catalyst solution.There is a lack of investigations related to their application at elevated temperature andpressure conditions that are usually applied in a membrane under Pressure Swing Adsorptiontechnologies. For this reason, our research work was mainly directed towards the elucidationof chemical paths for the stabilization of the IL into the pore structure via covalent bondingwith the active groups of the pore surface. Supported ionic liquid phase systems (SILP) of highCO2 separation performance, were prepared by immobilizing a methylimidazolium cationbased ionic liquid onto the pore surface of Vycor®and of two types of MCM-41. The“grafting to” method was applied involving (3-Chloropropyl) trialkoxysilane anchoring on thesupports’ silanol groups, followed by treatment with 1-methylimidazole and ion exchange withPF6-. Optimum surface pretreatment procedures and reaction conditions for enhanced ionicliquid (IL) loading were properly defined and applied for all modifications. A study on theeffect of different pore size on the physical state of the grafted 1-(silylpropyl)-3-methylimidazolium-hexafluorophosphate [spmim][PF6-] was also conducted. The[spmim][PF6-] crystallinity under extreme confinement into the pores was investigated bymodulated Differential Scanning Calorimetry and XRD and was further related to the capacityof the developed SILP to preferentially adsorb CO2 over CO. On this purpose, CO2 and COabsorption measurements of the bulk ionic liquid [bmim][PF6-] and the synthesizedalkoxysilyl-IL were initially performed at several temperatures. The results showed anenhancement of the bulk IL performance to preferentially adsorb CO2 at 273 K. The DSCanalysis of the SILPs revealed transition of the melting point of the grafted alkoxysilyl-IL to higher temperatures when the support pore size was below 4 nm. The 2.3 nm-MCM-41 SILPsystem, exhibited infinite CO2/CO separation capacity at temperatures below and above themelting point of the bulk IL phase, adsorbing in parallel significant amounts of CO2 in areversible manner. These properties make the developed material an excellent candidate forCO2/CO separation with pressure swing adsorption (PSA) techniques.Similar silane functionalised Ionic Liquids were synthesized for the development of thesupported IL membranes. The stabilization of a room temperature methylimidazolium cationbased ionic liquid (IL) into the pores of ceramic nanofiltration (NF) membranes, was achieved by means of a novel in-situ pressure assisted imbibition/reaction method. The completecoverage of the nanopores void space by the synthesized IL phase, introduced an additionalparameter that was pursued in parallel. The purpose was to develop hybrid membranes thatwill solely exhibit the gas solvation/diffusion properties of the IL. A silane functionalizedionic liquid phase of 1-methyl-3-(1-trialkoxysilylmethyl) imidazolium as cation andhexafluorophosphate as anion, was first synthesized and subsequently grafted onto the poresurface. The CO2/CO separation performance of the modified membranes was quitesignificant. The maximum CO2/CO separation factors achieved were 11 at 30oC, 25 at 50 oC,12 at 100 oC and 5 at 230 oC. The respective CO2 permeability values were 226, 520, 715 and2000 Barrer. The stability of the developed membranes has been verified in 3 sequential cyclesof heating/cooling, in temperatures ranging between 25 and 250 oC and a differential pressureup to 0.5 MPa.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Vangeli, Olga
- Βαγγέλη, Όλγα
Subjects
dc:subject × 10Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/43032