Back to search

Institutes outside Greece

Etude du transfert de matiere et des depenses energetiques dans deux laveurs gaz - liquide: le venturi de haute energie et l’ ejecteur venturi

Abstract

dc:description

Scrubbing in special devices (gas/liquid scrubbers) is one of the processes used to remove gaseous and particulate pollutants from industrial gas discharges into the atmosphere. Close contact between the gas to be treated and a selective liquid contained in these devices results in the transfer of pollutants from the gas phase to the liquid one. The efficiency of this process may be increased by a chemical reaction between the pollutants and chemical substances present in the liquid phase.Scrubbers are classically shaped installations of large dimensions (e.g. packed towers or spray towers) or less classical shapes of smaller dimensions. The latter consume more energy, while they are more efficient (e.g. complicated packed towers, jet scrubbers) like Venturi scrubbers, which have a converging part (up to the throat), followed by a diverging one (eventually, with a cylindrical or rectangular part in between). The objective of this thesis was the comparative energy and interfacial mass transfer study of a High Energy Venturi and of an Ejector Venturi scrubber. In the first one the gas, which is the driving force of the process, passes through the Venturi at a high velocity, of the order of 100 m.s-1 in the throat, and the resulting aerodynamic forces disperse the injected liquid. In second one, the liquid, which is the driving force of the process, is dispersed under pressure and its expansion causes the suction/pumping of the gas to be treated at a low velocity, of the order of 10 m.s-1 in the throat).The energy study involved the single-phase (gas or liquid) and two-phase flow through the Venturis. The axial, the radial and the mixed injection of liquid is studied by monitoring the pressure drop through the Venturi as a function of various parameters (mainly, gas and/ or liquid flowrate and nozzle(s) diameter).As far as mass transfer is concerned, including appropriate chemical reactions, its three characteristics (interfacial area and mass transfer coefficients in the gas and the liquid phase) were determined as a function of various parameters (liquid and gas flowrate, nozzle(s) diameter and liquid injection type).The two Venturi scrubbers were compared to each other and with other, already studied, scrubbers, with respect to the measured interfacial surface (or mass transfer coefficient in the gas phase) in relation to the consumed energy. Empirical correlations based on the results of this thesis and of the international literature have been proposed.The general conclusions of this thesis are:- The Venturi scrubber can operate either in the gas suction or the gas compression areas.- For a given energy consumption, the mixed (axial-radial) liquid injection is as efficient as the axial injection regarding the interfacial mass transfer.- Empirical correlations allow predicting the energy consumption, as well as mass transfer parameters.- Venturi scrubbers are more efficient compared to other types of scrubbers.

Degree

thesis:*
Grantor dc:publisher
Institutes outside Greece
Year dc:date
1983

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Hadjidakis, Dimitrios
  • Χατζηδάκης, Δημήτριος

Subjects

dc:subject × 20

Rights

Language dc:language
fre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/43039

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Hadjidakis, Dimitrios; Χατζηδάκης, Δημήτριος. Etude du transfert de matiere et des depenses energetiques dans deux laveurs gaz - liquide: le venturi de haute energie et l’ ejecteur venturi. Institutes outside Greece, 1983. http://hdl.handle.net/10442/hedi/43039