Back to search

Aristotle University Of Thessaloniki (AUTH)

Identification of anelastic and viscoelastic dissipation mechanisms in at-cut guartz resonators and thin polymer films with high frequency impedance spectroscopy and the differential evolution metaheuristic

Abstract

dc:description

This dissertation details the impact of anelastic and viscoelastic effects on the frequency and the electrical response of quartz TSM sensors, unperturbed or perturbed with thin polymer films made from poly(L-lactic acid) (PLLA), a semicrystalline, biodegradable aliphatic polyester. The frequency/electrical behavior of a series of unperturbed QCM sensors in a nitrogen gas phase at atmospheric pressure, was studied with high frequency impedance analysis, during repeated temperature ramps between 20 oC and 150 oC. The quartz effective properties were calculated through data fitting of the experimentally acquired frequency/admittance spectra with the transmission line model. Data analysis was undertaken with the classic version of the Differential Evolution (DE) algorithm, equipped with a module for computing the joint confidence regions for each optimization parameter. The results were explained on the grounds of different external and internal energy dissipation mechanisms which affect the frequency and the electrical response. The electrical and frequency response of a QCM sensor coated with thin films of poly(L-lactic acid) was studied with high frequency impedance analysis and temperature cycling between 25 and 115 oC. Two film samples were prepared with solution casting, whereas a third sample was realized via spin coating. The two solution cast films were thermally annealed well below the polymer’s glass transition temperature Tg (52.5 oC) for 24 hr under vacuum, whereas the spin coated film was thermally annealed at (Tg+20) oC for 24 hr under vacuum. The results were correlated with theoretical studies relating the stiffness of the film/substrate interface to a shift in the sensor’s frequency and electrical response. It was concluded that the film/substrate interface stiffness of the solvent cast films was compromised due to the existence of solvent (chloroform) therein, solvent which was used during the coating process. The spin coated film was subjected to three subsequent temperature ramps. The observed frequency and electrical response were attributed to the enhancement of the film/substrate interface stiffness, due to the non-isothermal crystallization of the PLLA during the repeated temperature ramps.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kakalis, Athanasios
  • Κακαλής, Αθανάσιος

Subjects

dc:subject × 30

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/43071

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kakalis, Athanasios; Κακαλής, Αθανάσιος. Identification of anelastic and viscoelastic dissipation mechanisms in at-cut guartz resonators and thin polymer films with high frequency impedance spectroscopy and the differential evolution metaheuristic. Aristotle University Of Thessaloniki (AUTH), 2015. http://hdl.handle.net/10442/hedi/43071