Back to search

National Technical University of Athens (NTUA)

Ανάπτυξη αφρωδών θερμομονωτικών ανόργανων πολυμερών υλικών από βιομηχανικά ορυκτά

Abstract

dc:description

In the present thesis, the development of insulating geopolymer foams from the perlite wastes exploitation was studied. A huge amount of industrial by-products could be utilized as the source for the construction of lightweight, insulating materials, which are based on the geopolymerization technology and the foaming process. Geopolymer materials are produced from a chemical reaction between various alumino-silicate oxides and alkali metal silicate solutions, under highly alkaline conditions. The mechanism of foaming (either by chemical or by physical means) is based on the generation of a gas that is retained in the geopolymer matrix, in the form of individual or interconnected voids. In the first part of this thesis, the synthesis of the geopolymer pastes was performed using perlite wastes as siliceous raw material and sodium hydroxide solution (NaOH) as the alkaline activator. Initially, the effect of the alkaline aqueous phase and the temperature on the setting time of the pastes, were examined. The viscosity of the slurries was also investigated in order to identify the workability of the pastes for their further foaming. The synthesized pastes were casted in appropriate open teflon molds and cured in mild conditions. The final geopolymers have been evaluated for their properties by compressive strength measurements and hydraulic stability tests, in highly alkaline conditions.The second part of the thesis includes the development of geopolymer foam boards, adding H2O2 as the blowing agent, in the already prepared geopolymer slurry. The resulted foam pastes were casted in metallic molds and cured in mild conditions. The evaluation of the final foam boards was implemented by: 1. Measurements of the apparent density and the thermal conductivity, 2. Compressive strength measurements, 3. Porosity estimation either by analytical methods or by digital image processing methods. In the third part of the thesis, the aforementioned foaming procedure was slightly modified for the optimization of the final board’s properties. Thus, pressure conditions were adjusted at the first stage of the foam paste’s curing, preventing the excessive expansion of cells and resulting in smaller voids with narrower distribution. Controlling the morphology of the materials during synthesis is of great importance because the structural characteristics strongly influence their performance and purpose. Final materials, apart from the low apparent densities and the thermal conductivity values, exhibited improved porosity with small isolated voids, homogeneously distributed in the board’s matrix.Finally, the comparison between perlite geopolymer foams and similar, commercial insulating and lightweight materials has been carried out. The produced porous materials exhibit lower density (276–1045 kg/m3) and thermal conductivity values (0.05–0.12 W/m.K) and similar or even better compressive strength values than the contemporary concrete porous materials. At the same time, the perlite geopolymer foams present lower cost (16.29–26.09 €/m3) and lower embodied energy values (1.7 MJ/kg) than the commercial ones.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Tsaousi, Georgia Maria
  • Τσαούση, Γεωργία-Μαρία

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/43108

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tsaousi, Georgia Maria; Τσαούση, Γεωργία-Μαρία. Ανάπτυξη αφρωδών θερμομονωτικών ανόργανων πολυμερών υλικών από βιομηχανικά ορυκτά. National Technical University of Athens (NTUA), 2018. http://hdl.handle.net/10442/hedi/43108