National Technical University of Athens (NTUA)
Αντιδιαβρωτική προστασία µεταλλικών κατασκευών µέσω φιλικών προς το περιβάλλον οργανικών επικαλύψεων
Abstract
dc:descriptionAmong the most effective and most widely used inorganic anticorrosive pigmentsare chromates, which are however characterized as toxic or/and carcinogenic. An alternativesolution to the use of chromates is non-toxic, simple and modified, zinc phosphate pigments.The protective mechanism of chromates is known, while various protective mechanisms ofzinc phosphate are suggested, none of them being widely accepted. Zinc phosphate pigmentsare referred to perform well in real conditions, however they are simultaneouslycharacterized by a poor anticorrosive ability in accelerated tests.In this work the effectiveness of the protection offered to steel specimens immersed insodium chloride solution by coatings containing environmentally friendly, simple andmodified, zinc phosphate pigments was examined and compared to that offered by chromatepigments. Coatings performance was monitored by Electrochemical ImpedanceSpectroscopy (EIS), corrosion potential time dependence and potentiodynamic polarizationmeasurements as well as by visual observations of degree of rusting and blistering afterexposure to salt-spray cabinet and to humid environment. The results of these measurementswere checked for a probable correlation with those from Koenig Pendulum and pencilscratch resistance measurements.It is proved that all zinc phosphate pigments presented satisfactory corrosion inhibitivecharacteristics during the whole exposure in NaCl solution. The best behavior was exhibitedby the coating containing Zn3Al(PO4)2, 4-8 H2O and was very close to that offered bycoatings with zinc chromate. It was also obvious that the various accelerated tests do not leadto absolutely identical results and that their classification is more reliable in the extreme(positive or negative) situations.Afterwards the effectiveness of the anticorrosive protection offered to steel specimens ofQ-Panels that had been industrially phosphatised, by coatings containing pigments of threedifferent concentration of zinc phosphates and zinc chromate are examined. Coatingsperformance was estimated by Linear Polarization (LP) measurements, corrosion potentialtime dependence, as well as by visual observations of degree of rusting and blistering afterexposure to salt-spray cabinet. The results of those measurements were checked for KönigPendulum, pencil scratch resistance, falling weight and bending test measurements.It is proved that all zinc phosphate pigments offered to Q-Panels satisfactory anticorrosiveprotection and the best was exhibited by the coating containing [Zn3(PO4)2.4H2O] and [Zn3Al(PO4)2.4-8H2O] in the biggest concentration and it was very close to that offered bycoatings with zinc chromate pigments.The behavor exhibited by common steel specimens was compared to that exhibited QPanelstogether with Q- Panels without phosphatisation, in lost weight measurements. It isproved that the phosphatisation of steel has positive influence in the anticorrosive protectionand the removal creates local galvanic cells.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Πεφάνη, Ειρήνη
Subjects
dc:subject × 18- Αντιδιβρωτική προστασία χαλύβων
- Απλοί χάλυβες
- Φωσφατωµένοι χάλυβες
- Οργανικές επιστρώσεις
- Χρωµικά πιγµέντα
- Φωσφορικά πιγµέντα
- Σύγκριση πιγµέντων
- Anticorrosive protection of steel
- Common steel
- Phosphatised steel
- Organic coatings
- Chromate pigments
- Phosphate pigments
- Comparison of pigments
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/43111