Back to search

Aristotle University Of Thessaloniki (AUTH)

Ανάπτυξη υδραυλικής κονίας για σκυροδέματα οδοποιίας με μεγάλη περιεκτικότητα σε ασβεστούχα ιπτάμενη τέφρα

Abstract

dc:description

Fly Ash is a by-product of energy power plants. In Greece, 60% of the energy production comes from the lignite energy plants. Μost of the fly ash produced is calcareous fly ash. It has special pozzolanic and/or hydraulic properties. Only 10% of the total by-product production (near 9 million tons of fly ash) is used by the cement industry for the production of composite cements. The rest is returned to the depleted lignite quarries with major environmental and economic consequences. Thus it is therefore essential not only for economic and technical reasons but also for environmental reasons to increase the percentage of fly ash exploitation. The innovation of this research is the development of a hydraulic binder with the use of high percentage of calcareous fly ash (over 50%), clinker, limestone and pozzolan. The scope of the development of this new building material is a product with a high ecological profile (by-product exploitation, CO₂ reduction, decrease of energy production, cost reduction of fly ash management) production costs lower than for conventional cement and the utilization of domestic materials. The object of this research is the development of a hydraulic binder that complies with the European Standard of Rapid Hydraulic Binders EN 13282-1, and especially for the demanding E4 category. The main targets were the determination of higher upper limits of sulfur oxide and free lime, the determination of the optimum combination of fly ash, clinker, pozzolan and limestone for the production of binary, tertiary and quaternary binders through co-grinding and finally the examination of hydration and curing mechanism of the hydraulic binders. The results of this research lead to the conclusion that the production of binary, tertiary, quaternary hydraulic binders is feasible with the use of 60-70% of fly ash, and which complies with the European Standard EN 13282-1, E4 category. Some binders even comply with the demanding compressive strength target of 40±2 MPa at 28 days curing age. The upper limit for fly ash freelime seems to be near 10%. Above this value serious expansion appears at the mortar testing bars. Fly ashes with sulfur content up to 7,58% seem not to negatively affect the hydration mechanism of the hydraulic binders. Also the optimum pozzolan content (10%) helps to increase the compressive strength rate of tertiary hydraulic binders with 65% of calcareous fly ash and 25% of clinker. Limestone filler effect is obvious in tertiary and quaternary binders, reducing the water demand for binders with all tested fly ashes. Through the investigation of strength development, it seems that small percentages of limestone collaborate better with calcareous fly ash with low percentages of sulfur and free lime but not with ones that have increased percentages.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Χαραλαμπίδου, Χριστίνα

Subjects

dc:subject × 13

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/43154

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Χαραλαμπίδου, Χριστίνα. Ανάπτυξη υδραυλικής κονίας για σκυροδέματα οδοποιίας με μεγάλη περιεκτικότητα σε ασβεστούχα ιπτάμενη τέφρα. Aristotle University Of Thessaloniki (AUTH), 2016. http://hdl.handle.net/10442/hedi/43154