Back to search

National Technical University of Athens (NTUA)

Application of control methods to fluid mechanics problems: flow past a cylinder

Abstract

dc:description

The present work has investigated computationally the optimal suppression of the Kármán vortex street in flow past a circular cylinder at low Reynolds numbers (Re<180), by use of passive, active open-loop, and active feedback control schemes. To this end, a multi-objective optimization tool has been developed, by coupling a CFD code with an optimization tool based on genetic algorithms. Two control measures have been considered in the present work, in particular: (a) application of slip conditions, and (b) implementation of mass transpiration on the cylinder surface. First, the problem of passive control of flow past a circular cylinder has been investigated, by means of partial (and full) slip. It has been demonstrated that implementation of hydrophobicity in both the front- and the rear stagnation point regimes enhances destabilizing effects. Guided by this observation, an optimization problem was formulated aiming at partially or fully suppressing the Kármán vortex street at a minimum control effort, in terms of partial slip. The optimization results have demonstrated that optimal application of partial slip is substantially more effective than full slip in suppressing flow unsteadiness, resulting in a decrease of control effort by up to 50%. Next, an active open-loop control scheme has been implemented by means of steady mass transpiration (suction/blowing) on the cylinder surface. Initially, suction/blowing has been applied in three regimes of the cylinder surface, namely: (a) the front stagnation point region, (b) the sideway region, and (c) the rear stagnation point region. The results have demonstrated that application of suction in the sideway or in the front stagnation point region, and blowing in the rear stagnation point region induce flow stabilization. Guided by these results, an optimization problem was formulated and solved, aiming at the partial or full suppression of the Kármán vortex street, at a minimal control effort, under the constraint of zero net mass transpiration. Complete vortex street cancelation has been attained at a control effort 30% lower, in comparison to previous studies. Finally, in order to attain partial or complete vortex street cancellation, by even lower levels of control effort, two proportional feedback control schemes have been developed, utilizing both control actions introduced above. In the first feedback control scheme, actuation consisted in time-dependent mass transpiration, while, in the second one, in time-dependent slip conditions. In both cases, the feedback signal is generated based on a velocity measurement in the near wake. Further, for both feedback control schemes, optimization problems have been developed, aiming at the partial or full cancelation of the vortex street at a minimal control effort. In comparison to passive flow control, a reduction in control effort by two orders of magnitude has been attained with the present optimized feedback control schemes.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Mastrokalos, Marios
  • Μαστρόκαλος, Μάριος

Subjects

dc:subject × 22

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/43222

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Mastrokalos, Marios; Μαστρόκαλος, Μάριος. Application of control methods to fluid mechanics problems: flow past a cylinder. National Technical University of Athens (NTUA), 2016. http://hdl.handle.net/10442/hedi/43222