Back to search

University of Ioannina

Macromolecular architecture for complex structures of elastomers: synthesis - charactezation - properties

Abstract

dc:description

In the present research thesis, the synthesis of nineteen (19) samples of linear and non-linear homopolymers and copolymers containing PI3,4 [where PI3,4: poly(isoprene) enriched in 3,4-microstructure (55-65%)] is reported. Specifically, four (4) linear homopolymers of the PI3,4 typeexhibiting low and high molecular weights, two (2) non-linear homopolymers of the H-PI3,4 type, five(5) linear diblock copolymers of the PB-b-PI3,4 type [where PB: poly(butadiene) with ~90-92% 1,4-content] exhibiting high (~100,000 g/mol) and very high molecular weights (~1,000,000 g/mol) as wellas eight (8) miktoarm star copolymers of the PB(PI3,4)2 and PB(PI3,4)3 types [four (4) samples perarchitecture] with approximately similar molecular characteristics with the linear diblock copolymerswere synthesized.The synthesis of the PI3,4 linear homopolymers was accomplished by the use of anionicpolymerization through high vacuum techniques. For the successful polymerization of isoprene, secBuLiwas used as the initiator and benzene as the solvent, while a small amount of THF (~1 mL) wasadded in order for the PI to obtain high 3,4-microstructure (55-65%).The complete synthesis of the complex architecture of the H-PI3,4 type involved initially thepreparation of the difunctional reagent 4-(chlorodimethylsilyl)styrene (CDMSS) in order to synthesizea macroinitiator in combination with living ends of PI3,4(-)Li(+). Through this macroinitiator a living 3-arm star of the (PI3,4)2PI3,4΄ type was prepared and by a linking reaction with the appropriatechlorosilane [(CH3)2SiCl2], the desirable model H-type PI3,4 samples were synthesized.The preparation of linear diblock copolymers were achieved utilizing anionic polymerizationvia high vacuum techniques and sequential monomer addition. Again, sec-BuLi was used as theinitiator, benzene as the solvent, while a small amount of THF (~1 mL) was added prior to thepolymerization of isoprene, in order for the PI to obtain high 3,4-microstructure. A variety of volumefractions was chosen and accomplished (0,30 < φPB < 0,70). For the synthesis of the star copolymerschlorosilane chemistry in combination with anionic polymerization techniques were used. The linkingreactions of the appropriate chlorosilane (CH3SiCl3 or SiCl4) with living PB and PI blocks, led to thefinal miktoarm stars under absolutely controlled conditions. The molecular weights (~100,000 g/mol)as well as the volume fractions of PB and PI blocks were approximately equal with those for the lineardiblock copolymers.The molecular characterization was performed via size exclusion chromatography (SEC) andmembrane osmometry (MO) or vapor pressure osmometry (VPO) in order to confirm the molecularweight distributions and the number average molecular weightM nof the samples.Also, proton nuclear magnetic resonance (1H-NMR) spectroscopy was adopted to calculate thecharacteristic ratios of stereochemical microstructures for both poly(dienes) as well as to identify thecomposition of each segment in the copolymers and stars.Thermal analysis via differential scanning calorimetry (DSC) was also performed in order toexamine the variation of glass transition temperature and its dependence from the molecular weight andthe weight fraction of each segment. The results indicated that all samples exhibited low molecular weight distributions and molecular as well as compositional homogeneity.Morphological characterization was performed through bright field transmission electronmicroscopy (TEM), in order to verify microphase separation and provide significant informationconcerning the dependence of the architecture (linear or non-linear) on the adopted morphology.Furthermore, rheological studies were performed in linear and non-linear PI3,4 homopolymers,through the collaboration with Prof. S.-Q. Wang (Morton Institute of Polymer Science andEngineering, The University of Akron, Ohio, USA), leading to new theoretical considerations for thenon-linear dynamic behavior of LCB polymers and their mixtures with the corresponding linear chainsin the presence of large external deformations in either simple shear or uniaxial extension.

Degree

thesis:*
Grantor dc:publisher
University of Ioannina
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Ntetsikas, Konstantinos
  • Ντέτσικας, Κωνσταντίνος

Subjects

dc:subject × 16

Rights

dc:rights
Statement dc:rights
  • BY_NC_ND
Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/43302

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Ntetsikas, Konstantinos; Ντέτσικας, Κωνσταντίνος. Macromolecular architecture for complex structures of elastomers: synthesis - charactezation - properties. University of Ioannina, 2015. http://hdl.handle.net/10442/hedi/43302