National and Kapodistrian University of Athens
Μελέτη της αντοχής του μεταλλοκεραμικού δεσμού επί χυτών τιτανίου κάτω από διαφορετικές συνθήκες χύτευσης
Abstract
dc:descriptionAmong the problems which were erupted from the use of titanium as a cast material for the construction of the frameworks in Prosthetic Dentistry is the incompatibility of the coefficient of thermal expansion between titanium and the feldspathic porcelains and the reduced firing point (882,5°C) in which metal-ceramic bonding is obtained when titanium is involved. The new porcelains, which were introduced to solve these problems, known as titanium porcelains, had to face and the problem of contamination of the outermost zone of the titanium cast from elements coming from the investments materials based on silicon dioxide (SiO2) and which seems to have a negative effect on the metal-ceramic bonding strength. Due to the mentioned unsolved problems research was target to improve the metal-ceramic strength by deleting contamination of titanium castings. In the present study a research work has been done on purpose to contribute in aforementioned target examine the metal-ceramic bonding strength of cast cpTi and three commercial dental porcelains for titanium, under different cast conditions. These conditions concern the quantity and the quality of the metal-ceramic strength between samples, which were protected from the contamination of elements of the phosphate, bonded investment with an inert ceramic coating. These samples were not ground but only were sandblasted. The comparison was done with titanium castings produced in a special magnesium investment material and were treated under the normal conditions, which are suggested from the manufacturers.144 plastic patterns were produced of size little oversized of that of the dimensions of ISO 9693. The patterns were divided equally in two groups, group A and group B. The patterns of group B were invested with magnesia investment. The patterns of group A were coated with a ceramic coating and were invested with a phosphate bonded investment material. The coating was composed of 50% stabilized ZrO2 with Y2O3 and 50% MgO and was selected between three coating containing the same stuff in different proportions with main criteria the protection of the cast from elements of the phosphate investment and its rheological properties. The effectiveness of the selected coating was determined by Line Scan and EDS procedures in a Scanning Electron Microscopy (SEM). The cast samples of group B were treated according to the manufacturers instructions. The cast samples of the group A were treated only with sandblasting. After sandblasting a mapping examination in a selected sample of each group was made for detection of Al and Zr from the sandblasting procedure and the coating, respectively.30 solid cast samples were selected for every group after x-ray examination. The precise dimensions were obtained according the ISO 9693 and every one of the three selected porcelains was applied on the treated cast samples according the ISO. All samples were tested in a three-point test and the broken surfaces were examined in an optical microscope to determine the mode of failure. Representative surfaces were analyzed in SEM to determine qualitative and quantitative the broken surfaces. The fracture values of group A and B were lightly over the down limit of the value, which is determined from the ISO (25 MPa) without any statistical significant difference among the tested groups.All types of failure were of adhesive type with minor elements of porcelain on the cast surface. Conclusively the protection of cast from elements of the phosphate investment using a ceramic coating and the elimination of the grinding procedure of the casting, it does not seem to verify the initial hypothesis that it could be beneficial for the enhancing of the metal-ceramic bonding.
Degree
thesis:*- Grantor dc:publisher
- National and Kapodistrian University of Athens
- Year dc:date
- 2008
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Spyropoulos, Konstantinos-Nikolaos
- Σπυρόπουλος, Κωνσταντίνος-Νικόλαος
Subjects
dc:subject × 10Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/43389