Aristotle University Of Thessaloniki (AUTH)
Environmental amelioration through enhanced heat transfer with nanofluids
Abstract
dc:descriptionEnhancing the apparent thermal conductivity of a base fluid by the addition of solid particles of a different material (a second component and a second thermodynamic phase) has been an attractive idea for more than a century. The dispersion of solid particle with dimensions of the order of nanometers (nanoparticles) in a liquid medium, commonly referred to as ‘nanofluid’, was seriously examined for heat transfer applications in 1995, when Choi et al.[1] stated that the use of nanofluids with suspended copper nanoparticles will result in ‘dramatic reductions in heat exchanger pumping power’. They even discussed nanofluids with a thermal conductivity of ‘3 times that of a conventional fluid’! Following that presentation, in 2001 Choi et al.[2] extended their idea, publishing the ‘anomalous thermal conductivity enhancement in nanotube suspensions’. Here, the word anomalous implies that the apparent thermal conductivity of the two phase system is significantly different from that based upon theories of heat transfer in such systems at the time. Although twenty years have passed since then, the evidence for and against the existence of such an ‘anomalous’ behavior is, at best, confused as we shall show. The current study aims to examine thoroughly the experimental data for heat transfer measurements reported in two, and sometimes three-phase systems. The work is separated in two main sections; -In Section A (composed of Chapters 1 to 5), a study of the thermal-conductivity enhancement of fluids in the presence of nano-particles is performed.-In Section B (composed of Chapters 6 to 8), the effect of the thermal conductivity and viscosity enhancements on heat transfer, is investigated.More analytically, In Chapter 1 it is shown that measurements of the apparent thermal conductivity of a fluid when nanoparticles are added, exhibit deviations between themselves that far exceed their mutual uncertainties. It is further proven for the first time, that this in most cases is attributed to the fact that many investigators employed not-properly the transient hot-wire technique, or they used improperly other techniques. Consequently, Chapter 2 presents and analyzes the fundamental theoretical background needed for performing measurements of thermal conductivity with the transient hot-wire technique. Hence in Chapter 3 a new very accurate, absolute, transient hot-wire instrument designed and build according to all the criteria discussed, is presented and validated. Chapter 4 describes the application of the new transient hot-wire instrument to the accurate absolute measurements of the systems: a) ethylene glycol, when CuO, or TiO2, or Al2O3 nanoparticles are added, and b) water, when TiO2, or Al2O3 nanoparticles or multiwall carbon nanotubes (MWCNT) are added. The results of these new measurements, confirm our earlier tentative findings based solely on a critical evaluation of measuring techniques employed, that there are substantial errors in most of the reported literature for the apparent thermal conductivity of nanofluids studied here and, by inference, for many others.In Chapter 5 existing models for the prediction of the thermal-conductivity enhancement are presented. Subsequently the reasons why most of them are not acceptable are discussed. Following that, it was decided to discuss the present very accurate measurements performed in this work in relation only to two selected models, the Hamilton and Crosser model [3] of 1962, and the 2016 model of Shukla et al.[4].In order to investigate the heat transfer capabilities of the selected nanofluids, another property that contributes or can hinder quite strongly the heat transfer, is their viscosity. In Chapter 6 the rheological behavior of the aforementioned systems is investigated, and their viscosity is measured. In Chapter 7, it is shown that, in general the combined changes in physical properties that accompany suspension of nanoparticles or nanotubes in fluids mean that the heat-transfer benefits are all rather modest, even when they are achieved. Finally in Chapter 8 some suggestions for future work, where nanofluids might be important are discussed.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2018
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Terstsinidou, Georgia
- Τερτσινίδου, Γεωργία
Subjects
dc:subject × 14Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/43425