University of Patras
Νέα μέθοδος ηλεκτροκίνησης κλιβάνου σε τσιμεντοβιομηχανία με ασύγχρονους κινητήρες συνδεδεμένους σε κοινό περιμετρικό οδοντωτό τροχό οδηγούμενους από αντιστροφείς
Abstract
dc:descriptionIt is well known that in the field of heavy industry, the stability and continuity of the operation of the production systems are of major importance. Downtimes of machinery parts cause production losses as well as unwanted side effects such as increase in machinery wear, imbalance of the production system and other problems and damages during the restart of the production line. In this work an electrical drive system for efficient kiln drive operation was designed, developed, simulated and installed to improve the mechanical operation of the incorporated machinery, absorbing forces and oscillations caused by existing wear and production process changes. All interventions were only focused on the electrical part of the existing system, leaving the mechanical parts completely unaffected for capital expenditure and time savings. This new electrical kiln drive system consists of a of two AC Motors of 315 kW each, on an existing common tooth gear, as a new contribution for the operational optimization of Cement Rotating Kilns. Two separate inverter units control the two asynchronous motors with a common rectifier. This work aspires to contribute to the heavy industry sector by presenting a successful application of power electronic techniques in a cement kiln drive system illustrating how modern technology facilitates a scientific method for solving on the one hand, backlash problems on a tooth gear and the other hand to accomplish reduction of energy consumption, improvement of operational efficiency and performance. This work also illustrates how and maintenance needs are eliminated while reducing operational costs, down-times and energy consumption, by applying contemporary technology, including power electronics and dynamic performance in control systems. More specifically, all production requirements were successfully addressed, high torque provision at low speed start, speed reference behavior improvement during load change, accommodation of fast changes to the power needed to address load changes and provisioning of reliable control. Following the implementation, mechanical relief became also immediately apparent while all reported adverse effects were eliminated. During the first year of operation no downtime due to mechanical or electrical fault occurred. This elimination of downtimes reduced energy waste by saving the relative high portion of energy required for restart and for bringing all kiln systems to operational equilibrium. Additionally, costly maintenance work requirements were significantly reduced compared to the previous situation with the DC motors and their corresponding regular needs for cleaning and frequent brush replacements. Furthermore, the selection and installation of a system with a common rectifier DC bus instead of the installation of two separate Converters led to significant savings in the capital expenditure of the initial installation and also energy consumption savings by the allowance of electrical energy flow from one inverter to another. Finally, this intervention in only the electrical part of the kiln drive, which succeeded in drastically improving its mechanical behavior, leaded to postpone or even eliminate altogether scheduled high-cost maintenance works, which in turn led to financial savings.The excellent results of this first intervention to the one kiln together with the positive experience, led to the installation of the same system to the second Kiln of the plant, proving the high level of success of its contribution to the optimization of this heavy industry’s machinery operation
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Christopoulos, George
- Χριστόπουλος, Γεώργιος
Subjects
dc:subject × 20- Ηλεκτρονικά ισχύος
- Αντιστροφείς
- Βαριά βιομηχανία
- Βιομηχανία τσιμέντου
- Μετάδοση κίνησης
- Backlash
- Ασύγχρονες μηχανές
- Εξοικονόμηση ενέργειας
- Heavy industry
- Ac motor drives
- Cement plants
- Cost savings
- Energy savings
- Frequency converters
- Industrial control
- Torque control
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/43610