Back to search

University of Patras

Μελέτη καινοτόμων υλικών για την κατασκευή και ανάπτυξη ηλιακών κυψελίδων

Abstract

dc:description

This PhD dissertation investigates the possibility of using innovative materials in third generation photovoltaics for optimizing the process of conversion of solar energy into electricity as well as photoelectrochemical cells for the production of hydrogen.Third-generation photovoltaic modules can be distinguished into Dye Sensitized Solar Cells, using liquid electrolytes, and Solid State Solar Cells. They are fabricated using low-cost materials and mainly on low-cost deposition processes. Dye Sensitized Solar Cells consist of the following main parts: (1) The photoanode, i.e. a transparent conductive substrate (FTO glass), which carries a nanostructured semiconductor, usually titania, onto which the photosensitizer is deposited. (2) The cathode electrode that bears an electrocatalyst which allows the exchange of charges (3) The electrolyte containing a suitable redox couple for the transfer of charges. The photons of solar radiation are absorbed by the photosensitizer and excite it. Excited electrodes are injected into the semiconductor’s conduction zone and resulting in the oxidation of the photosensitizer. Through an external circuit, the electrons move to the cathode electrode and reduce the redox electrolyte which in turn regenerates the photosensitizer. An important disadvantage in the operation of this kind of solar cells is the evaporation of the electrolyte. This issue has led to the fabrication of a new type of solar cells, the Solid State Solar Cells, where the electrolyte is replaced by a hole transporting material (HTM). Solid State Solar Cells use a conductive FTO substrate on which all the fundamental materials of the device are deposited. This is the titanium dioxide semiconductor, the photosensitizer, the hole transporting material and the metallic electrodes for collecting the produced electric current. In this case as well, the photosensitizer absorbs the photons and the excited electrons are injected in the semiconductor’s conduction zone (exactly as in the case of DSSCs). The remaining holes move to the cathode following a bounce mechanism between the adjacent molecules or characteristic chemical groups, in contrast to the liquid redox electrolyte where the transport of the charges happens through the movement of the redox ions. Initially, several ways of optimizing Dye Sensitized Solar Cells were examined based on the utilization of innovative materials in the photoanode and in the cathode electrode. The operation of two photosensitive materials as well as a pioneering hole transporting material in SSSCs were investigated as well.Firstly, our research focused towards the replacement of commercial dyes in Dye Sensitized Solar Cells with lower-cost photosensitizers without the presence of toxic metals. For this purpose, we investigated the use of various novel organic Donor-p-Acceptor dyes, as photosensitizers, in dye sensitized solar cells. We studied also organic dyes which exhibit an innovative mode of anchoring to the TiO2 semiconductor leading to stable non-hydrolyzable bonds on the surface of the titania. Additionally, the possibility of fabricating Dye Sensitized Solar Cells with a new inorganic semiconductor (BiOI), as active material was explored. Then, we focused on the use of a pioneering alternative electrocatalyst consisting of the combination of reduced graphine oxide, polypyrene and PEDOT (RGO / PPy / PEDOT) as electrocatalyst in Dye Sensitized Solar Cells in order to replace the expensive platinum.Subsequently, the target was to completely replace the organic photosensitizers with inorganic materials that have a simpler structure, lower cost and better stability. For this purpose, solid state solar cells were constructed using antimony sulfide as photosensitizer. Two different methods of deposition of Sb2S3 were studied (chemical deposition and spin coating). Various combinations between Sb2S3 photoanodes and different hole transporting materials were also investigated. In the case of the solid type solar cells, perovskites have attracted particular interest as a material capable of absorbing light across the whole spectrum of vision. In this direction, the perovskite structure CH3NH3PbClxI3-x was synthesized and the use of this material in conjunction with the main conductor, Spiro-OMeTAD, was studied. Although the performance of these devices was quite high, the relatively high cost and the disputed stability of Spiro-OMeTAD has created the need to look for alternative suitable hole transfer materials. Therefore, a handy, robust and low-cost material studied, Copper Phtalocyanine (CuPc), as a hole transporter in perovskite solar cells. In addition, we examined the possibility of fabricating up-scaling electric modules consisting of solid state solar cells interconnected in series and in parallel with the purpose of showcasing the practical applications of these devices.In the final part of this dissertation, we studied the production of hydrogen by photoelectrochemical devices. A photoelectrochemical cell consists of the anode electrode onto which a semiconductor (photocatalyst) is deposited, a conductive cathode onto which an electrocatalyst is deposited and an aqueous electrolyte. The two electrodes are interconnected via an external circuit and are immersed in the electrolyte. The photocatalyst absorbs the energy of the photons of the sunlight and becomes excited. This results in the creation of electron-hole pairs. The holes oxidize the water and create H+ which diffuse into the solution while the electrons travel through the outer circuit to the cathode where the reduction of H+ towards the production of H2 happens. In the present thesis, photoelectrochemical production of hydrogen was investigated by the application of innovative photocatalysts, which exhibit increased absorption in the visible spectrum of radiation. The photocatalysts under study were WO3 and BiVO4 in combination with TiO2.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Raptis, Dimitrios
  • Ράπτης, Δημήτριος

Subjects

dc:subject × 6

Rights

dc:rights
Statement dc:rights
  • BY
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/43613

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Raptis, Dimitrios; Ράπτης, Δημήτριος. Μελέτη καινοτόμων υλικών για την κατασκευή και ανάπτυξη ηλιακών κυψελίδων. University of Patras, 2018. http://hdl.handle.net/10442/hedi/43613