Back to search

National Technical University of Athens (NTUA)

Numerical and experimental investigation of brine discharge from desalination plants into coastal waters

Abstract

dc:description

Among common disposal methods of brine, the disposal into surface waters requires the least capital cost. Therefore, it is a common practice for desalination plants located near coastal waters to discharge the brine into them through submerged outfalls. Normally, two different types of jets can be formed during the discharge, which are: (a) jets denser than ambient waters; e.g. jets formed after the disposal of brine from reverse osmosis desalination plants, and (b) jets less dense than ambient waters; e.g. jets formed after the disposal of brine from thermal desalination plants. The mixing region of brine discharges can be divided into the near field region and the far field region. The near field region extends from the outfall up to the point that the jet impinges on a boundary (on the bottom or the surface if the jet is denser or less dense than the ambient, respectively) and beyond this point the far field region starts.The purpose of the present study is to develop numerical models for the calculation of the geometrical and dilution characteristics of brine discharge from desalination plants. These models can be employed for the selection of the proper design and location of the brine outfall that increases the brine dilution and therefore the mitigation of the adverse impacts of salinity and/or temperature (and other possible chemical additives) of brine on marine ecosystems. The research aims of the present work are: (1) the development of numerical models for brine discharges, (2) the validation of these models with experimental measurements from the literature and experiments performed in the present thesis, and (3) the application of the numerical models in a brine discharge case from a desalination plant. Experimental investigation:Experiments were performed for inclined denser than ambient jets to investigate: (A1) the geometrical characteristics (jet trajectory and outer jet boundary) in the near field region, and (A2) the geometrical characteristics and dilution in the beginning of the far field region. Additional experiments were performed for vertical and horizontal denser jets, discharged at a height above the bottom, to investigate their geometrical and dilution characteristics in the near and far field regions. From the experimental investigation the derived conclusions are the following: (1) the geometrical characteristics of the inclined jets are in reasonable agreement with experimental data derived from other researchers, (2) the density currents developed on inclined bottoms after the impingement of denser jets can be approximated by using two semi-ellipses centered on the jet axis impingement point, (3) the presence of a horizontal bottom affects the dilution field of vertical jets up to a height from the bottom, and (4) in the vicinity of the jet impingement point, large concentration fluctuations appear due to the high turbulent nature of the flow. The fluctuations seem to decay with distance due to turbulence collapse under the influence of density stratification. The dilution in the density current can be linear correlated with either the distance form source or the distance from the impingement point.Part of the experimental measurements was used to develop the near field MCM model. Numerical investigation:Two integrated models, consisting of a near field and a far field model, were developed for brine discharges from (a) reverse osmosis, and (b) thermal desalination plants. In the first case, the integrated model was consisted of the near field model Modified CorJet Model and the far field model Princeton Ocean Model (POM). The MCM was based on the CorJet model which was properly modified to take into account the escape of mass from the main flow of inclined denser than ambient jets. With this modification the geometrical and dilution characteristics of inclined denser jets discharged into stagnant and uniform ambient are better described. The connection of the near and far field models was performed with the development of a coupling algorithm. The validation of the model was performed with measurements from the literature and the (A2) experiments of the experimental investigation. In the second case, the integrated model was consisted of the near field model CorJet, without modification, and the far field model FLOW-3DL. The connection of the near and far field models was performed with the development of a coupling algorithm that permits the interaction of the near and far field models in flowing and uniform ambient. The validation of the model was performed with experiments from the literature. The model was applied in a fictitious case to calculate the geometrical and dilution characteristics of brine discharge from a thermal desalination plant into the coastal waters of Mantoudi, Evia.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Nikiforakis, Ioannis
  • Νικηφοράκης, Ιωάννης

Subjects

dc:subject × 20

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/43634

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Nikiforakis, Ioannis; Νικηφοράκης, Ιωάννης. Numerical and experimental investigation of brine discharge from desalination plants into coastal waters. National Technical University of Athens (NTUA), 2015. http://hdl.handle.net/10442/hedi/43634