National Technical University of Athens (NTUA)
Θερμοδυναμική ανάλυση συστημάτων θερμικής αποθήκευσης και ηλιακής ψύξης με χρήση νανορευστών
Abstract
dc:descriptionThe objective of this dissertation is to investigate the operation and efficiency of an adsorption solar cooling system as well as the application of nanotechnology in the form of nanofluids in the fundamental applications of Mechanical Engineering such as heat and mass transfer. In particular, the aim of the present research is the experimental and computational study of a hybrid system which involves thermal energy production through evacuated tube solar collectors, power generation and heat generation via hybrid parabolic thermal-photovoltaic solar collectors, storage of heat in storage tanks and its consumption in order to drive a zeolite adsorption cooler cooling production without the use of environmentally harmful organic refrigerants. Thermal energy storage is further examined through the experimental study of a system featuring paraffin-type organic phase change material. The evaluation of the above system also includes the use of nanoparticles in order to examine the improvement of its performance. From the study of available literature, it is concluded that significant progress has been made in the field of nanofluids. Most of the theoretical and experimental work regards the properties of nanofluids and their effect on heat and mass transfer applications. However, the literature review shows that important steps remain before their commercial use, steps concerning their production, their stability and their cost. The study of nanofluids, in the context of this dissertation, involves the modeling of the natural and forced convection of nanofluids flow in microchannels, the assessment of the nanofluids utilization in condensers and evaporators and the effect of nanoparticles on carbon dioxide absorption. Thereafter, thermal energy storage systems are examined. Among the various thermal energy storage technologies, phase change materials (PCM) exhibit considerable advantages, making them ideal for storing heat but also for maintaining a constant temperature for a long time. PCMs take advantage of the latent heat of melting and thus they store more energy than materials which utilize only sensible heat. In addition, during phase change, PCMs maintain a constant temperature, contributing to the reduction of the required thermal and cooling loads of buildings. Despite the above advantages, phase change materials require a long time to switch from solid to liquid phase and vice versa due to their low thermal conductivity. The study of phase change materials is multifaceted and includes numerical, computational and experimental analysis. In specific, one-dimensional and two-dimensional mathematical models are developed to study phase change of organic and inorganic PCMs. The validity of the one-dimensional model is verified through the analytical solution while the two-dimensional model is compared with available data from the international literature. The PCMs are evaluated for their melting time, storage capacity and buoyancy induced velocity filed. The experimental study involves the design and installation of a concentric tube heat exchanger which contains organic PCM and the evaluation of its thermal behavior through multiple experiments. In order to improve the material’s conductivity, Cu and Al2O3 nanoparticles are gradually added and the composite PCM featuring single and hybrid type nanoparticles is evaluated for melting time and stored capacity. In the context of the dissertation, a prototype solar cooling system is designed, installed and investigated in the Laboratory of Applied Thermodynamics. The system uses two types of collectors (ETC and PVT) to provide heat to a zeolite-type adsorption cooler. The two types of collectors are evaluated experimentally and computationally by developing mathematical models which are validated against data deriving from the experimental process. The results of the theoretical models as well as the experimental data prove the satisfactory performance of the collectors throughout the year. The performance of the cooler is considered, through the experimental evaluation, to be sufficient. During the experiments, the energy balance is satisfied to a sufficient degree. Finally, the integrated unit is modeled in TRNSYS environment and it is evaluated through energy, environmental and economic performance indicators.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2018
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Nitsas, Michail
- Νίτσας, Μιχαήλ
Subjects
dc:subject × 14Rights
dc:rights- Statement dc:rights
-
- BY_NC_ND
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/43684