University of Patras
Υπολογιστική διερεύνηση πολυφασικής ροής υγρών-αερίων-στερεών σε κατακόρυφους αγωγούς μεγάλου μήκους και εφαρμογή σε εγκαταστάσεις εξόρυξης πετρελαίου
Abstract
dc:descriptionThe aim of the present doctoral thesis is the computational investigation of the multiphaseflow formed inside the DIFIS system during its use for prompt intervention in cases of offshoresubsurface blowouts.The DIFIS system consists of an inverted funnel (dome), which initially collects the leakingmixture, a riser tube and a buffer bell. It was originally designed for intervention in cases ofleakage from shipwrecks, based on the difference between oil and sea-water densities, whichcreates the necessary buoyancy in order to channel the leaking oil through the riser tubetowards the buffer bell.In cases of underwater blowouts, the presence of natural gas in the leaking mixture incombination with the highly increased flow rates compared to shipwrecks, as well as theexistence of sea-currents that can drift the mixture out of the system, necessitate a revision ofthe dimensions and the position of the system, in order to ensure trouble-free operation. Thetypes of two, three and four phase flows developed in the interior are examined, with thepresence of sea-water and quantities of oil, methane and methane hydrates.In the first stage, a preliminary study is carried out, using a theoretical model based onhomogeneous two-phase water-oil flow, and then two-dimensional axisymmetric and threedimensionalcomputational simulations were conducted, in which 4 types of oil of differentproperties were studied.Then, for a more detailed study of the system, two indicative types of oil are selected, foundin the Gulf of Mexico (Mars crude oil) and in the Norne field (Svale crude oil), 200 km off theNorwegian coast, in order to initially examine the position in which the system should beplaced, taking into account for the first time, the conditions of sea-currents which are presentin the region of the leaking point, in order to ensure the absorption of the leaking mixture. For amore accurate estimation of the required configuration of the system’s bottom section, so thatit can respond to the typical conditions of the leakage, the following are examined: The break-up mechanisms and the subsequent lateral expansion of the leaking jetduring its rise. The effect of sea-currents on the trajectory of the leaking mixture. The flow configuration in the interior of the dome after inserting it at a lower height.A dimensional analysis of the leaking jets is performed and then the trajectory analysis,based on empirical relationships that have emerged from a sufficient number of experimentalresults for all cases of leakage and the results were compared with those of the correspondingsimulations. The observed intense drift, in combination with the existence of a unique leakingpoint, after the intervention in the area of the accident and the placement of a BOP (BlowoutPreventer), leads to a re-evaluation of the dimensions and the position of placement of thedome.Then, the two-phase flow of sea-water - oil and three-phase sea-water - oil - methane isstudied, in the interior of the riser tube. Three-dimensional numerical simulations for bothtypes of oil were performed for three different cases of leaking rate, in the first meters of theriser tube and the aim is to examine the ability of the system to absorb them. The resultspresent the distribution of the phases in the interior of the riser tube, the developed mixturevelocity as well as its correlation with the presence of secondary phases, while new flowpattern maps are constructed, describing the mixture behaviour through the presentation ofthe flow areas and the conditions under which they occur. In addition, a comparison is made ofthe modelling of the maps with appropriate theoretical models of two-phase flow, it isproposed a new model for the demarcation between the two observed flow areas, andanalyses the interconnection between the deformation rate of the flow by breaking up thestructure of the secondary phases.Finally, are examined the temperature distributions in the interior of the riser tube, and ismodelled the creation of methane hydrates via User Defined Function, for the simulation offour phase flow of sea-water - oil - methane - hydrates and investigate the possibility of flowblockage.In the Appendix, is presented the procedure for the selection of the suitable turbulencemodel for the computational investigation, additional results concerning the pressuredistribution in the interior of the riser tube, the code describing the conversion of methane intohydrates (User Defined Function) and an alternative proposal for operation of the buffer bell,with the use of air injection method for the transportation of the accumulated oil.The main objective of the computational investigation of the multiphase flow inside the DIFISsystem is the extension of its use as a system for the prevention of pollution of the marineenvironment in cases of underwater blowouts, with application directly at the point of theaccident.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2018
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Giannoulis, Dimitrios-Periklis
- Γιαννούλης, Δημήτριος-Περικλής
Subjects
dc:subject × 6Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/43725