Aristotle University Of Thessaloniki (AUTH)
Πειραματική και αριθμητική διερεύνηση της βελτίωσης της σεισμικής απόκρισης έργων αντιστήριξης με τη χρήση μιγμάτων μικρού ειδικού βάρους στο έδαφος αντιστήριξης
Abstract
dc:descriptionIn the current thesis an experimental and analytical approach to improving the dynamic response of retaining structures using granular soil/granulated rubber mixtures as backfill material is presented. To this end, the study is divide in two subsections: as a first part the effect of the rubber content on the mechanical and dynamical properties of mixtures of volcanic materials with granulated rubber derived from recycled used tires is investigated, and as a second part the implementation of the above mixtures as backfill soil layer behind retaining structure is studied.The experimental study of the lightweight granular soil/rubber mixtures focuses on the mechanical and dynamic properties of dense (Dr≈80%-90%) saturated volcanic soil/granulated rubber mixtures in a wide range of deformations, and on the comparison with a gravelly soil/rubber mixture. Mixtures of volcanic origin (pumice) and quarry gravel, with granulated rubber at a percentage from 0% to 30% per dry weight mixtures are studied, with the ratio of the mean diameter of mixture granules, λ=D50,s/D50,r, ranged between 0.64 and 2.15.The experimental procedure of the current research was performed by using a monotonic triaxial apparatus (TRX) in order to estimate the elastic stiffness in terms of equivalent modulus, Eeq, corresponding to certain levels of axial strain, and the strength parameters (c', φ') of the mixtures in axial deformation levels up to 20%. The small-strain shear modulus (Go), the small-strain damping ratio (Do), and the influence of shear deformation on their values of the aforementioned materials, from small to medium shear strains (10-5%<γ<3∙10-1%), were investigated by using a resonant column (RC) device of free-fixed. For greater levels of shear strain (10-2%<γ<3%) a cyclic triaxial apparatus (CTRX) was used. The results of the two set of tests were combined to form the complete dynamic behavior of the examined mixtures by means of G/Go-γ-DTo curves in a wide range of strains. The CTRX apparatus was also used to perform a series of liquefaction tests (LIQ) to investigate the mixtures resistance against cycling loading.The strength of the mixtures of the current study is tested by means of monotonic triaxial testing under static load and drainage conditions (CD). The parameters examined in the monotonic triaxial loading tests are the elastic stiffness, E, the dilation angle, ψ, and the strength parameters according to the Mohr-Coulomb failure criterion of the mixtures, in relation to the mean effective confining stress, σ'm, ranging from 100kPa to 300kPa, the percentage of rubber in the mixtures, r(%), the mean grain size, D50, and the coefficient of uniformity, Cu, and the ratio of the mean diameter of mixture granules, λ=D50,s/D50,r. Based on the experimental data of the above test program some useful conclusions can be also drawn about the critical state of the examined primary materials during loading until failure, in relation to the percentage of rubber in the mixture, r(%), the envelope stress value, σ3, and the ratio of the mean diameter of mixture granules, λ=D50,s/D50,r.The dynamic response of the mixtures of the current study is tested by means of: a) resonant column testing under tortional load and undrained conditions (CU), and b) cyclic triaxial testing under strain control and undrained conditions (CU). The parameters examined in the resonant column and cycle triaxial device are the small-strain shear modulus (Go), the small-strain damping ratio (Do), the variation of the G/Go-γ-DTo curves, of the mixes in relation to the radial stress value, σ'm, ranging from 25kPa to 200kPa, the percentage of rubber in the mixtures, r(%), the mean grain size, D50, and the coefficient of uniformity, Cu, the ratio of the mean diameter of mixture granules, λ=D50,s/D50,r, the shear strain amplitude, γ, ranged from about 10-5% to 3%, and the number of loading cycles, Ncyc, for a maximum number of 10 cycles for each level of strain. The experimental data of the above test program allows for the extraction of analytical relations to estimate the small-strain shear modulus, Go, the small-strain damping ratio, Do, and the influence of shear deformation, γ, on their values, in the form of G-γ-D curves, in relation to the percentage of rubber in the mixture, r(%), the envelope stress value, σ3, and the ratio of the mean diameter of mixture granules, λ=D50,s/D50,r.Furthermore, the investigation the effect of the elastic fraction on mixtures' resistance against liquefaction is carried out by means of cyclic triaxial testing under stress control and undrained conditions (CU). The parameters examined in the cycle triaxial device are the deviatoric stress, q, the mean effective stress, p', the axial deformation, ε(%), and the excess pore water pressure ratio, ru, of the mixes in relation to the percentage of rubber in the mixtures, r(%), the mean grain size, D50, and the coefficient of uniformity, Cu, the ratio of the mean diameter of mixture granules, λ=D50,s/D50,r, and the cyclic shear stress ratio, CSR, in order to evaluate the earthquake induced liquefaction susceptibility of saturated mixes of soil/rubber mixtures.The effect of the implementation of the granular soil/rubber mixtures as backfill material on the dynamic response of retaining structures is investigated by using the finite element code ABAQUS through 2D equivalent linear analyses, that take into account the reduce of the shear modulus and the increase of the soil damping with the shear strain. The behavior of the simulated retaining structures is presumed to be elastic while all soil-wall interfaces are consider tensionless with potential for sliding. The dynamic response of the improvement material is consider to be non-linear and occurs from the experimental results based on the laboratory investigation of the present study.The main examined parameter is the type of the improved soil and it is determined by the natural properties of the solid material as well as by the percentage of the rubber content per mixture weight (0%, 10%, and 30%). The geometrical characteristics as well as the material parameters of the improved soil layer present a considerable and beneficial effect on the response of the structure. The effectiveness of the backfill counter-supported layer is of course affected by the dynamic properties of the structure and the characteristics of the input motion.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2018
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Tsinaris, Angelos
- Τσινάρης, Άγγελος
Subjects
dc:subject × 20- Εδαφοδυναμική
- Βελτιώσεις εδαφών
- Γεωσυνθετικά υλικά
- Δυναμικές ιδιότητες
- Παράμετροι αντοχής
- Lightweight mixtures
- Pumice
- Granulated tire rubbers
- Shear modulus
- Damping ratio
- Seismic response
- Ponce volcanique
- Caoutchouc Granulé
- Cisaillement dynamique
- Amortissement dynamique
- Réponse sismique
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Engineering and Technology
- Civil Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/43852