National Technical University of Athens (NTUA)
Ανάπτυξη μεθόδου προσδιορισμού βαρέων συστατικών σε ελαφρά κλάσματα πετρελαίου
Abstract
dc:descriptionThe purpose of this thesis is to develop an alternative new method that will aid in the determination of high boiling point components in gasoline. The method is based on the evaporation of a small amount of fuel (2.9 g) under specific conditions, and gravimetric determination of the residue after the completion of the evaporation stage. The glass container filled with the sample is placed in an upright position in a thermostatically controlled coking furnace for a specific time period. During this residence time (20 min) in high temperature (220 °C), the fuel is evaporated and a very small amount of residue remains in the container. The residue is determined as a percentage by mass of the test sample. The quality of automotive fuels is critical to the driveability and vehicle emissions. The European Committee for Standardization (CEN), sets specification limits for gasoline volatility through EN 228 standard. The standard sets limits on vapor pressure, distillation (percent evaporated at three temperatures, Ε70, Ε100, E150), final boiling point, distillation residue, and the vapor lock index. The method used for the determination of heavy residue in gasoline is the atmospheric distillation test, according to EN ISO 3405 test method. The increase of back end volatility correlates with the presence of higher molecular mass compounds in the fuel which don’t have enough time in order to be fully burnt in the combustion chamber. The presence of heavy components (as diesel) in gasoline is caused mainly by remnants in tanks and pipelines or bad housekeeping in the fuel distribution and supply chain. The early detection of fuel contamination is critical for both the final consumer and the supplier.Upon completion of the thesis, it was proved that the EN ISO 3405 test method is not capable to detect low contaminations of gasoline with heavier components (< 2% m/m). The results of the measurements were carried out on co-operative fuel engine (CFR), showed that gasoline contamination with diesel at this concentration (1.7% m/m) would reduce the octane number by one unit. The need to detect the contamination of gasoline samples at these low concentrations has led to the research of a new method, which was the subject of the thesis. The new residue quantification method (N.M.) is a fast and simple test method that is based on the evaporation of a small amount of fuel under specific conditions. The N.M. was proved to be capable to detect contaminations of gasoline with diesel at low concentrations, contributing this way to the fuels quality control and quality assurance of the fuel that is delivered to the end consumer.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2018
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Zannikou, Ypatia
- Ζαννίκου, Υπατία
Subjects
dc:subject × 16Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/43919