Aristotle University Of Thessaloniki (AUTH)
Synthesis and development of smart drilling fluids using nanoparticles to tailor their transport properties for enhanced drilling operations
Abstract
dc:descriptionDrilling deeper to discover new oil and gas reservoirs in hostile environments, extended horizontal sections and multi-fractured zones, necessitates the improvement of the existing drilling fluids or the design of new ones in order to meet the technological demands. The key challenge in developing such drilling fluids is to ensure stable filtration and rheological properties, but also to enable their judicious customization, particularly for high pressure-high temperature (HP/HT) applications. Thus, the search is under way to develop smart drilling fluids to address the severe technological challenges. Smart drilling fluids are novel water-based fluids having the potential of increasing the efficiency of drilling operations with a substantial minimization of lost circulation issues and differential sticking problems along with a simultaneous reduction in the environmental footprint. Nanomaterials are available commercially at affordable prices and they are considered as the best candidates for smart drilling fluids due to their unique properties stemming from their extremely high surface-to-volume ratio. This study aimed to develop specifically engineered water-based drilling fluids for optimum drilling performance and minimum environmental impact by using commercial (C) hematite (Fe2O3) nanoparticles (NP), commercial (C) magnetite (Fe3O4) nanoparticles (NP), custom-made (CM) bare (CM-B) and citric-acid coated (CM-CA) Fe3O4 NP and C nanosilica (SiO2) as drilling fluid additives. A 7 wt% water-bentonite suspension was used as the base fluid and the different NP were added at different concentrations (0.5 wt%, 1.5 wt% and 2.5 wt%). A range of physico-chemical techniques were employed to characterize the NP such as, X-ray diffraction (XRD), X-ray fluorescence (XRF), Fourier-transform infrared spectroscopy (FTIR), N2 sorption, a superconducting quantum interference device (SQUID) magnetometer and High Resolution Transmission Electron Microscopy (HRTEM). A freeze granulation - freeze drying (FG-FD) technique of bentonite suspensions containing different nanoparticles was implemented in order to capture effectively the associated microstructures at the different temperatures prior to physicochemical characterization. The rheological measurements were performed at different temperatures (up to 70°C) and ambient pressure using a Couette type viscometer. The Herschel- Bulkley (HB) model was used to describe the rheological behavior of all samples at the different tested temperatures. Filtration characteristics were determined at elevated pressures and temperatures using a HP/HT filter press (at 21 bar and 176˚C). Filter cake surface morphology was evaluated using scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS).The findings confirm that the association of the nanoparticles with the bentonite platelets in different configurations plays a critical role in the rheological characteristics of aqueous bentonite suspensions. The charge and nature (e.g. magnetic, coated or not) of the added nanoparticles are also important factors in determining the magnitude of the effects observed. Addition of C Fe3O4 NP as well as CM (both bare and citric acid coated) Fe3O4 NP affected the rheological profile of bentonite-based drilling fluids up to 70˚C by increasing yield stress and viscosity. SiO2 NP adversely affected the rheology of water bentonite suspensions by decreasing the yield stress. Aging at 176°C/350˚F for 16 hours showed that the CM-CA (citric-acid coated) Fe3O4 NP remained stable with minor changes in rheological properties. Optimum concentration of NP was determined at 0.5 wt%. At this concentration the CM-CA Fe3O4 NP yielded maximum filtration reduction by 40% at HP/HT conditions compared to that of the base fluid, and was even greater (-43%) after thermal aging. These results indicated that the newly developed nano-enhanced drilling fluids can significantly reduce the fluid loss which in turn leads to great cost savings. On the other hand, SiO2 NP increased the filtration volume. Through extensive microscopic analysis of the filter cakes with Scanning Electron Microscopy (SEM), it was determined that using optimum concentration of NP resulted in a rigid and low permeability filter cake giving superior filtration characteristics. In addition, this research revealed the interfacial phenomena taking place and the modes of interaction between bentonite particles and nanoparticles that lead to such superior properties using Transmission Electron Microscopy (TEM) technique. Based on the research findings, a model of the interactions evolving in water Na+-bentonite suspensions containing different nanoparticles at 25°C and 60°C in alkaline pH is suggested. The effect of an external magnetic field on the rheological properties of a drilling fluid containing superparamagnetic citric acid coated Fe3O4 NP-tailored to meet specific downhole and environmental demands with tunable rheological properties- was also examined. The results indicated that all tested fluids exhibited a typical monotonic increase in shear stress and apparent viscosity with increasing magnetic field strength, which was attributed to the strong chain-like structures between the superparamagnetic NP that were formed at high magnetic flux densities.This research has shown that nano-based drilling fluids can offer unprecedented potential for enhanced drilling operations. Due to their unique features compared to the parent materials and their ease of manipulation to perform certain functional tasks, nanomaterials can retain their properties over a wide range of operating conditions. A comprehensive characterization approach was adopted, combining micro- and macro- measurements, which enabled the exploitation of the improved microstructure qualities of such suspensions. Engineering high performance drilling fluid systems with excellent rheological and filtration characteristics at HP/HT environments can help operators run at peak efficiency by achieving the reservoirs’ highest potential, while eliminating the use of aggressive and potential damaging chemicals and minimizing non-productive time and formation damage risks.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2018
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Vryzas, Zisis
- Βρύζας, Ζήσης
Subjects
dc:subject × 14Rights
dc:rights- Statement dc:rights
-
- BY
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/43961