National Technical University of Athens (NTUA)
Υδροδυναμικές συνθήκες σε ύφαλο διαπερατό κυματοθραύστη λόγω θαλασσίων κυματισμών
Abstract
dc:descriptionSubmerged breakwaters (SB), often rubble mound structures, are frequently built along the coast toreduce the impact of waves and currents affecting the shoreline, mainly by induced wave breaking, andto prevent beach erosion. This type of low-crested breakwaters enhances its acceptability due to itsenvironmental advantages mainly in easing water circulation near the surface reducing thus anyadverse impact on water quality, while ensuring the aesthetic value of the coastal landscape. Theseconsiderations demonstrate that the introduction of SB for protection of the coastal zone is a promisingfield of research. A solid understanding of the interaction between water waves and SB is thus vital,especially in SB with relatively steep slopes which are more commonly used.Only a little is known on how marine organisms respond to the SB’s presence. Hydrodynamicconditions, in the body of the structure, are known to be of significance for the habitation of marine lifewithin and around the barrier. Indeed, in assessing the ecological impact of such a structure,knowledge of hydrodynamic field in the interior of the structure is of prime importance. The main targetfor technical applications is trying to combine the structure’s technical efficiency with ecologicalrequirements. A key parameter to assess the shelter SB provide to the local habitats is the waterparticle velocity and pore pressure in the interior of the structure.In this study, in order to extent the applicability of a fully dispersive and highly nonlinear 2DHBoussinesq-type model presented by Chondros and Memos (2014), a depth-averaged Darcy equation,extended to include 2DH Forchheimer terms, calculating the flow within the porous medium followingthe approach of Cruz et al. (1997) and Avgeris et al. (2004). The modified Boussinesq-type model,referred to as mCM14 hereinafter, incorporates extra 2DH terms accounting for the interaction betweenthe waves over the structure and the flow within the porous breakwater. Also, a major point of thisstudy is to go a step further from the depth averaged velocity of the Boussinesq model in the interior ofthe structure and to present a method, that is not too difficult numerically, for estimating the distributionof horizontal particle velocities in two directions and respectively as well as pore pressures in theinterior of a submerged permeable structure. A velocity profile, based on a distribution of the nonlinearwave theory (Dingemans, 1997), is fitted to the numerically predicted depth-integrated velocity given bymCM14 in the SB interior. Further, another method based in the full form of Darcy-Forchheimerequation is reworked to obtain the pore pressure as a function of the velocities quantities.Due to the small number of experiments including wave propagation over SB with steep slopes and extreme porosity and practically the lack of laboratory measurements of velocities and pressures in theinterior of the structure, an adequate number of 1DH and 2DH experiments were conducted during thepresent research. Specifically, for the sake of comparison with the mCM14 model, laboratorymeasurements of free surface elevation, orbital velocities and pore pressures in the interior of an SBwere taken in a flume of the Laboratory of Harbour Works, National Technical University of Athens,involving 1DH regular long and short waves propagating over a SB with steep slopes and extremeporosity under breaking and non-breaking conditions. Furthermore, 2DH laboratory experiments werecarried out in a wave basin in the Hydraulic Engineering Laboratory, Department of Civil Engineering,University of Patras. Those tests included both measurements of free surface elevation over apermeable SB with steep slopes and 3D flow velocities inside the SB, under wave attack of regular andirregular (Jonswap) waves, including breaking or not breaking events.The aim of this study is to present and integrated coastal model in order to cover the most commonpractices in real life applications covering SBs with porosity and steep slopes, relevant wave breakingprediction and description of the hydrodynamic field in the structural interior due to sea waves.Furthermore, an original aspect of this study refers to laboratory comparative experiments over SB for1D and 2DH wave propagation.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Metallinos, Anastasios
- Μεταλληνός, Αναστάσιος
Subjects
dc:subject × 34- Αριθμητικό μοντέλο τύπου Boussinesq
- Εργαστηριακές μετρήσεις 1DH & 2DH
- Διαπερατές κατασκευές
- Κατανομή πιέσεων
- Κατανομή ταχυτήτων
- Μετρήσεις ανύψωσης/ταπείνωσης στάθμης ελεύθερης επιφάνειας
- Μετρήσεις πιέσεων
- Μετρήσεις ταχυτήτων
- Μονοχρωματικοί κυματισμοί
- Παράκτιες κατασκευές
- Περιβαλλοντική μηχανική
- Ροή Forchheimer
- Σύνθετοι κυματισμοί
- Ύφαλοι κυματοθράυστες
- Boussinesq-type model
- Coastal structures
- Ecological engineering
- Forchheimer flow
- Jonswap waveς
- Laboratory experiments 1DH & 2DH
- Permeable structures
- Pore pressure measurements
- Porepressure distribution
- Porous structures
- Regular waves
- Submerged breakwaters
- Surface elevation measurements
- Velocity distribution
- Velocity measurements
- Wave kinematics
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Engineering and Technology
- Civil Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/44014