National and Kapodistrian University of Athens
Αµφίφιλες και αµφίφοβες επιφάνειες ενσωµατωµένες σε µικρορευστονικές διατάξεις πάνω σε ψηφίδα µε εφαρµογές στη χηµική ανάλυση
Abstract
dc:descriptionIntroductionWater droplets can roll–off the leaves of various plants while their surfaces remain dry evenafter a heavy rain. The amazing water-repellent behavior of these natural surfaces intriguedmany researchers to mimic nature. This phenomenon is called superhydrophobicity and it islinked to the self-cleaning properties of surfaces. Recently, the fabrication of surfaces, whichrepel a wide range of liquids other than water, e.g. oils or various organic solvents hasattracted much more interest. These surfaces are termed superoleophobic or superamphiphobic(water and oil repellent). Fabrication of mechanically, thermodynamically stable andhydrolyticaly resistant, superamphiphobic surfaces is a field of intense research activitypublished in high impact factor scientific journals. Furthermore, the incorporation of suchsurfaces inside microfluidic devices and microsystems is beneficial, since the properties ofthese surfaces facilitate the implementation of microfluidic devices in fields such asbiotechnology and chemical analysis.Thesis scope and objectivesThis PhD thesis deals with surface modification of polymeric materials using micro andnanotechnology, and specifically polymer micro-nanotexturing. The purpose is to controltheir wetting properties and eventually incorporate them inside microfluidic devices withapplications in analytical chemistry. Micro and nanotexturing of the polymeric materials iscarried out by means of gas plasma proccessing and alternative lithographic methods. Thethesis has two major objectives:A. The design, fabrication and detailed characterization of random and quasi-ordered hierarchical superamphiphobic surfaces on various polymeric substrates. The characterizationincludes detailed morphological characterization, nanoscratch tests to probe the mechanicalstability of the structures, hydrolytic and other immersion tests in organic solvents and studyof their thermodynamic stability.B. The use of the proposed nanotextured surfaces for the fabrication of passive elements(valves, pumps and antifouling surfaces) in order to control the flow through microfluidicdevices. The operation of passive valves and the antifouling characteristics are based on thesuperhydrophobic wetting properties of the nanotextured surfaces incorporated inside microfluidic devices. The operation of pumps is based on superhydrophilic properties of thenanotextured surfaces.Contents and results of the thesisChapter 1 is an introduction to the topic of superamphiphobicity, microfluidics, plasmaprocessing etc.Chapter 2 is a review of the literature concerning the fabrication of superhydrophobic andsuperamphiphobic surfaces and their characterization methods. Devices incorporating suchsurfaces for flow control and immunoassays done on magnetic beads are also reviewed tocover all the subjects presented here.In Chapter 3, we present the equipment used to fabricate and characterize the superamphiphobicsurfaces and the devices presented.Towards the first objective of the thesis random, superamphiphobic surfaces on a wide rangeof polymeric substrates (i.e. poly (methyl methacrylate) PMMA, polyether ether ketonePEEK, cyclic olefin polymer COP, and polydimethylsiloxane PDMS) were successfullyfabricated (and are described in Chapter 4) using a two-step process: a) oxygen plasmaproccessing and b) deposition of a perfluorinated monolayer. The surface composition of theperfluorinated monolayer examined using X-ray spectroscopy is shown before and afterdeposition. All surfaces exhibited high contact angles exceeding 160o for water and 150o foroil drops, while hysteresis stayed below 10o in all cases except hexadecane drops on PDMS.Quasi-ordered poly(methyl methacrylate) PMMA, superamphiphobic surfaces using a layer ofcolloidal particles as an etching mask, were also fabricated by oxygen plasma proccessingfollowed by deposition of a perfluorinated monolayer. All quasi-ordered surfaces becamesuperamphiphobic exhibiting very low hysteresis for all liquids tested (9o for hexadecane). In addition, the phenomenon of hydrophobic recovery of the cyclic olefin polymer in order tofabricate superhydrophobic surfaces without using any hydrophobic film was alsoinvestigated. Superhydrophobic COP surfaces were fabricated after plasma processing for 4min or longer after ageing for 60 days. This chapter (with parts from chapter 5) has beenpublished as a part of the following article: «Plasma Micro-Nano-textured, Scratch, Water andHexadecane Resistant, Superhydrophobic and Superamphiphobic Polymeric Surfaces withPerfluorinated Monolayers», Kosmas Ellinas, Sidharam P. Pujari, Dimitrios A. Dragatogiannis,Constantinos A. Charitidis, Angeliki Tserepi, Han Zuilhof, and EvangelosGogolides, ACS Appl. Mater. Interfaces, 2014, 6 (9), pp 6510–6524, DOI: 10.1021/am5000432”. This publication was one of the first publications reported in theliterature about polymeric superamphiphobic surfaces. The results about COP will bepublished in a future publication about COP entitled: «Three-dimensional Plasma MicroNano-texturedCyclo-Olefin-Polymer Surfaces for Biomolecule Immobilization orEnvironmentally Stable Superamphiphobicity».In Chapter 5 we present the results from the mechanical and thermodynamic characterization,as well as the stability of the surfaces to immersion in water and organic solvents(hexadecane). In addition, environmental ageing tests were also performed to study the impactof harsh environmental conditions on the surfaces. To study both the behavior of theperfluorinated monolayer, and the topography, all tests (mechanical, environmental, andhydrolytic characterization) were done on both untreated and plasma treated substrates. Themechanical stability of the surfaces is studied using nanomechanical characterization. Thisstudy showed that ordered surfaces exhibit excellent resistance against scratches for forces upto 80µΝ while the coefficient of friction measurements exhibited 50% reduction after thedeposition of the perfluorinated monolayer. The thermodynamic stability of the surfaces wasstudied by high-speed impact experiments of different liquid drops on the surfaces. Thethreshold pressure in which transition from Cassie-Baxter to Wenzel occurs was alsodetermined. This study showed that the ordered surfaces with the optimized profile showedthe higher resistance against pinning, exhibiting a pinning threshold of 36 atm, the highestvalue ever reported for lotus leaf surfaces. In addition, drop impact tests with liquids havinglower surface tension are reported for the first time. These tests show that the thresholdpressure for the transition from Cassie-Baxter to Wenzel is 7 atm for a liquid with surfacetension of 36mN/m (half of that of water). Hydrolytic experiments and immersion tests in hexadecane were also used to study the surface resistance against immersion in differentsurface tension liquids. All surfaces, except PEEK, revealed excellent stability againstimmersion in liquids, which reached 40 days for water and for 14 days for hexadecane. Theoptimum behavior was observed for the ordered surfaces, possibly due to the multiscalehierarchical topography they present. Finally, the surfaces show good environmental stabilityand remain superhydrophobic even after 60 continious cycles of ASTM G154-06. Thischapter has been published as a part of the following articles:a) Plasma Micro-Nano-textured, Scratch, Water and Hexadecane Resistant,Superhydrophobic and Superamphiphobic Polymeric Surfaces with Perfluorinated Monolayers,Kosmas Ellinas, Sidharam P. Pujari, Dimitrios A. Dragatogiannis, Constantinos A. Charitidis, Angeliki Tserepi, Han Zuilhof, and Evangelos Gogolides, ACS Appl. Mater.Interfaces, 2014, 6 (9), pp 6510–6524, DOI: 10.1021/am5000432 (see also Chapter 4).b) Superamphiphobic Polymeric Surfaces Sustaining Ultra-High Impact Pressures ofAqueous High and Low-Surface Tension Mixtures, Tested with Laser-Induced ForwardTransfer of Drops, Kosmas Ellinas, Marianneza Chatzipetrou, Ioanna Zergioti, AngelikiTserepi, and Evangelos Gogolides, Adv Mater 27(13): 2231-2235.In Chapter 6 we show how superamphiphobic surfaces can be incorporated insidemicrofluidics. Nanotextured superhydrophobic valves and their use as passive flow switchesare demonstrated. Valves of different pressure thresholds ranging from 50 to 110 mbar, whichcan be adjusted depending on the application, either by changing the geometric dimensions orby changing the etching time are presented. The valves exhibit stable and reproduciblebehavior and can be used several times. On the other hand, superhydrophilic nanotexturedsurfaces may be used as capillary pumps. As a possible application, a flow switch device withthree outlets, which controls the flow inside a device and allows a flow of the liquid with apredetermined sequence is also shown. The technology demonstrated is flexible and fast, andcan be easily adapted on the actual application. This chapter has been published as a part ofthe following article: «Superhydrophobic, passive microvalves with controllable openingthreshold: Exploiting plasma nanotextured microfluidics for a programmable flowswitchboard», Kosmas Ellinas, Angeliki Tserepi, Evangelos Gogolides, Microfluidics andNanofluidics, 2014, 17(3), 489-498. This publication was one of the first publications on thefield of passive microvalves, using plasma nanotexturing to create superhydrophobic valveswith controllable pressure threshold.Finally, in Chapter 7 we present a micro-bead immunoassay on a novel microfluidic platform,which implements superhydrophobic, passive valves at the inlet and outlet to simplify andoptimize its operation. To evaluate the performance of the device three different protocols (one simple and two more complicated to detect two different proteins, IL6 and PDGF-2)were tested. The manufacturing process was kept simple and short. The immunoassayperformed inside the proposed device greatly benefits from the advantages of miniaturization,while superhydrophobic, passive valves help to reduce the consumption of expensivereagents, the loss of beads, while they increase the speed of reaction and signal compared toconventional methods performed on plates. More specifically a succesfull detection of IL6 isdemonstrated inside the microfluidic platform using 1/10 of the beads and analytes quantity at1/4 of the time typically used on assays done on plates. In the detection of PDGF-2 1/8 of the time typically used on assays done on plates is shown. In all cases, the bead detection wasperformed off-chip using Luminex, xMAP 3D. The results of this chapter will be included inan article that will be submitted. The artcle title is: «Micro-bead Immunoassay on a NovelMicrofluidic Platform, Incorporating Superhydrophobic Passive Valves».At the end we present the main results and some propositions about future work that can bedone in order to expand this work.
Degree
thesis:*- Grantor dc:publisher
- National and Kapodistrian University of Athens
- Year dc:date
- 2015
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Ellinas, Kosmas
- Έλληνας, Κοσμάς
Subjects
dc:subject × 23- Επιφανειακή κατεργασία πολυµερών
- Υπεραµφιφοβικότητα
- Μικρο και νανοΰφανση µε πλάσµα αερίων
- Μικρορευστονικές διατάξεις
- Υπερυδρόφοβες βαλβίδες
- Ανοσοπροσδιορισµοί σε µαγνητικά σωµατίδια
- Υπερυδροφοβικότητα
- Polymer surface modification
- Plasma processing
- Superhydrophilic surfaces
- Superamphiphobic surfaces
- Superhydrophobic passive valves
- Microbead immunoassay
- Microfluidic devices
- Drop impact experiments
- Φυσικές Επιστήμες
- Άλλες Φυσικές Επιστήμες
- Επιστήμες Μηχανικού και Τεχνολογία
- Νανοτεχνολογία
- Natural Sciences
- Other Natural Sciences
- Engineering and Technology
- Nano-Technology
Rights
dc:rights- Statement dc:rights
-
- BY_NC_ND
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/44050