Back to search

National Technical University of Athens (NTUA)

Μελέτη μηχανικών ιδιοτήτων νανοσυνθέτων υλικών και μίκρο -, νάνο - δομών με την τεχνική της νανοδιείσδυσης

Abstract

dc:description

Nanoindentation is an experimental technique used to determine mechanical properties and to probe mechanical behavior of structures and materials in lengths ranging from micrometers even to some nanometers. Through nanoindentation loading-unloading curves, modulus of elasticity, hardness, yielding, residual stresses and toughness of samples can be extracted. From theoretical perspective nanoindentation applications are included in the broader field of contact mechanics. In particular, those elements that give the necessary documentation to extract mechanical properties from nanoindentation experiments (loading-unloading curves) are taken from contact mechanics, theories of elasticity, plasticity and generalized theories of continuum media. In general, in the area of metals, ceramics and hard materials, the application of nanoindentation is extensive and the results are in good agreement with classical experimental techniques such as single-axial or biaxial stretching, three or four point bending, torsion and hardness testing with regard to values of modulus of elasticity and hardness. However, the instrumented indentation studies in composites, nanocomposites, nano-/micro-structures and biological materials is a relatively new field and the relevant methods have not reached the same degree of maturity in terms of experimental protocols, definition of properties and comparison with classical techniques.Within this framework, the thesis deals with the application of nanoindentation in the study of advanced materials, such as metal and polymer matrix nanocomposites for aeronautical applications, nano- and micro-structures used on manufacturing of "smart" structures, as well as nanomechanical and nanotribological properties of films and coatings.After a general overview of the relevant theoretical background, enriched with a series of observations and comments on some points that is not usually given the necessary attention, the first main point concerns the extraction of the fundamental equation on which the Oliver and Pharr method is based. Within Chapter 1, using the appropriate potential functions, simulating the use of a pyramidal or conic indenter, and based on the theory of potential, the formula linking stiffness of a material (Stiffness, S) to the loading-unloading curve during nanoindentation is extracted. Oliver and Pharr's method is based on this formula which is the most widely accepted method by the scientific community used to extract mechanical properties (mainly modulus of elasticity and hardness) from loading-unloading curves. Furthermore, size effects are mentioned for which “smaller is stronger.” For similar reasons, the scale-dependent behaviour is also observed in indentation testing when the size of the hardness impression is small, resulting in an indentation size effect (ISE). According to continuum plasticity, the hardness should be independent of depth. The hardness is defined as the ratio of the load on the indenter, P, to the projected area of contact of the hardness impression, A. This phenomenon was also observed during nanoindentation experiments in our specimens. To study this phenomenon a mathematical model has been developed and applied to experimental results, which can reduce errors in hardness values, taking into account the penetration depth deriving from the misidentification of the first point of contact. The second main outcome is the predictive of model-based microscopic values from nanoparticle experiments in accordance with the Vickers method, in contrast to the results of the Oliver and Pharr method in combination with the standard model prediction of hardness values of Nix and Gao.Going from the theoretical to the experimental part, Chapter 2 describes the nanoprocessing experiments conducted in aluminum alloys (5083, 6082) amplified with nanoparticles (SiC, TiC, CNTs, CeMo-MBT) to investigate the deformation mechanism and mechanical properties (modulus of elasticity and hardness) are extracted. The elastic modulus and hardness from nanoparticle experiments are linked to the mechanical behaviour and strength of aluminum alloys (6082 and 5083) and composites by the addition of particles (SiC, TiC and CNTs). Aluminum matrix composites were obtained by welding aluminum alloys (5083, 6082) with the friction welding technique with nanoparticle-reinforced (SiC, TiC and CNTs) agitation in the welding zone. Comparison of nano-hardness and micro-hardness distributions revealed different amplification mechanisms in the welding zone due to the presence of amplification particles. Finally, the effect of nanoparticles on the resistance to corrosion of composites was studied.Multicycle grid nanoindentation tests, combined with high-resolution Scanning Electron Microscopy (SEM) and Scanning Probe Microscopy (SPM) observations, were applied on a commercial Carbon Fiber (CF) reinforced epoxy matrix composite in order to study the induced damage mechanisms with respect to: (a) the orientation of the CFs relative to the surface and (b) the CF packing density. Normal to the surface CFs showed a multiple cracking pattern, those forming 45° showed distinct cracking, while CFs parallel to the surface did not suffer cracking. CF detachment from the epoxy matrix was observed in all cases. Pop-in type discontinuities were observed only in the samples where cracking ensued, as revealed through SEM and SPM observations. The load to induce CF cracking increased with the increase of the matrix pocket area. Elastic modulus, hardness and significance of elastic deformation as an indentation energy absorbing mechanism, were reduced right after pop-in.Finally, Chapter 4 optimized a nanomechanical and nanotribological characterization protocol to study the resistance to the engraving of superhydrophobic and hyperamphoves to superoleophobic polymeric surfaces of polymethacrylate methyl (PMMA), polyether ketone (PEEK) and polydimethylsiloxane (PDMS). The loading protocol was based on the analysis of the strength of the microchips taking into account their geometrical characteristics so as to select the lowest friction coefficient as compared to the uncoated surface. Scanning electron microscopy (SEM) observation after nanoscratch tests confirmed the strength of the surfaces.In summary, nanoindentation provides important information about the deformation mechanisms and mechanical properties of a wide range of materials from thin films, textured surfaces, carbon fibers and composites, to metal matrix nanocomposites. The deformation mechanisms studied and the mechanical properties extracted in this thesis may in some cases, such as thin films and superhydrophobic surfaces, not play the primary role in related applications based on the advanced type of materials, but can have a significant effect on the function of the relevant provisions. For example, film debonding from the substrate may affect the efficient operation of the devices, while the linking of the modulus to the porosity of the film is an important design parameter. Also, in the design of films and nanostructured surfaces with tailored hydrophobicity, the strength of micro-pillars is an important parameter, while scratch resistivity plays a major role in applications. The mechanical stability of these surfaces is often ignored and it is therefore important to establish tests supported with the appropriate experimental protocols to determine these properties. On the other hand, the mechanism of deformation of the matrix-carbon fiber interface plays a key role in the design of classical and advanced composite materials, while the assessment of interfacial strength is an important parameter. The interface plays a crucial role as it ensures the efficient transfer of charge from the matrix to the fiber while the design of stronger fiber-matrix interfaces is an active field of research. An equally active research area is the investigation of amplification mechanisms and the study of the mechanical behaviour of nanocomposite metal matrix.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Dragatogiannis, Dimitrios
  • Δραγατογιάννης, Δημήτριος

Subjects

dc:subject × 14

Rights

dc:rights
Statement dc:rights
  • BY
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/44182

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Dragatogiannis, Dimitrios; Δραγατογιάννης, Δημήτριος. Μελέτη μηχανικών ιδιοτήτων νανοσυνθέτων υλικών και μίκρο -, νάνο - δομών με την τεχνική της νανοδιείσδυσης. National Technical University of Athens (NTUA), 2018. http://hdl.handle.net/10442/hedi/44182