Back to search

Aristotle University Of Thessaloniki (AUTH)

Integrated photonic and plasmonic circuits for optical interconnect applications

Abstract

dc:description

Living in the era of “BIG DATA” and Internet-Of-Things (IoT) optical interconnecttechnologies have been introduced as essential technological workhorse in scaling up thebandwidth of optical communications across several segments of networks with variousreach, spanning from inter-and intra- Data-Center (DC), rack-to-rack, board-to-board tochip-to-chip communication links. Photonic integration technologies employing SiliconPhotonics and Plasmonics continue to evolve with the prospect of revolutionizing futureoptical interconnects for multidisciplinary applications, by building up powerfulPhotonic-Integrated-Circuits (PICs), yet leveraging the existing CMOS infrastructures.The main research contributions of this thesis revolved around the development of novelsilicon photonic and plasmonic devices as well as circuits, addressing fundamentalrequirements imposed by optical interconnects for DCs and on-chip communications aswell as biosensing applications, complying with CMOS manufacturing standards andaiming at ultra-high performance.At first, a series of uni-directional and bi-directional fully etched Grating-Couplers(GCs) on 340 nm thick Si layer have been proposed aiming to face the challenge of 3Dintegrated Vertical-Cavity-Surface-Emitting-Laser arrays on SOI substrates for futureActive-Optical-Cables. GCs designs that employ a 340 nm thick Si layer against otherapproaches that employ grating structures with ultra-fine feature sizes, customized Silayer thickness, thinned oxide buffers, a-Si overlays and more than one etching-stepskeeping the manufacturing complexity at high levels. By applying chirping andapodization techniques based on “meta-heuristic algorithms”, the experimental couplinglosses for a uni-directional, fully etched, apodized and TM operating GC reached 4.8 dBat 1547 nm. Going one step further and taking into account an almost unmodified 0.35μm CMOS Back-End-Of-Line process along with its dielectric stack, bi-directionalSWGCs (Sub-Wavelength Grating Couplers) for TE or TM polarization have beentheoretically proposed exhibiting sub-dB coupling loss values with high immunity tooptical back-reflections and increased alignment tolerance. Sub-wavelength engineeringbased on grating nanostructures has been incorporated for the first time in a bidirectionalGC layout in view of flip-chip bonded VCSEL arrays on SOI.Moving far deeper into the development of photonic integration technologies, aplasmo-photonic waveguide platform is presented, merging Si3N4 photonics with nobleand CMOS Surface-Plasmon-Polariton (SPP) waveguides in view of optical interconnectapplications for DCs and biosensing. More specifically, the co-integration of Si3N4 photonics with gold based slot and stripe SPP waveguides for biosensing applications,relied on butt and vertical directionally coupled Si3N4-to-plasmonic interfaces, thatdemonstrated experimental insertion losses around 2.5 dB in aqueous environment at1550 nm. The proposed interfaces facilitated the excitation of SPP modes on-chipwithout using bulk optics. Si3N4 photonics have been employed instead of Si, in anattempt to exploit their lower propagation losses and manufacturing cost. Finally, twotypes of plasmo-photonic waveguides incorporating stripe and slot based SPPwaveguides, have been demonstrated benchmarking their performance characteristicswith the prospect of being the sensing transducers of interferometric sensors. Followingthe successful co-integration of gold based SPP waveguides on Si3N4 platform, world’sfirst plasmo-photonic platform, merging Si3N4 photonics and Al based SPP waveguidesat telecom wavelengths using CMOS processes is demonstrated. The feasibility of cointegrating Al plasmonic waveguides with Si3N4 photonics employing fully CMOScompliant materials and processes has been demonstrated, by comparing theperformance characteristic of single mode Al SPP waveguides after being fabricatedusing two different fabrication processes. SPP propagation in air and aqueousenvironment has been also demonstrated with an Lspp of 64 μm in air at 1550 nm, whichis the highest reported so far among all the single mode Al based SPP counterparts.Finally, world’s first data traffic at 25 Gb/s over a CMOS SPP waveguide is alsopresented. The signal integrity characteristics of the Al SPP waveguide have beenvalidated through BER measurements showing error free operation with negligiblepower penalty. The proposed CMOS compatible plasmo-photonic platform, using Al asthe plasmonic material of choice due to its good balance between propagation losses anddurability to liquid claddings, revealed strong exploitation potential towardsrevolutionizing optical interconnects for both on-chip communications and biosensingapplications.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Dabos, George
  • Ντάμπος, Γεώργιος

Subjects

dc:subject × 19

Rights

dc:rights
Statement dc:rights
  • BY_NC_ND
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/44291

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Dabos, George; Ντάμπος, Γεώργιος. Integrated photonic and plasmonic circuits for optical interconnect applications. Aristotle University Of Thessaloniki (AUTH), 2018. http://hdl.handle.net/10442/hedi/44291