National Technical University of Athens (NTUA)
Πειραματικές και υπολογιστικές μέθοδοι ενεργειακής αξιολόγησης κτιριακού κελύφους με έμφαση σε υπερ-μονωτικά υλικά
Abstract
dc:descriptionThe current thesis addresses the experimental and numerical methods for the energy assessment of building envelopes and investigates the impact of Super Insulation Materials on the envelope upgrade. The energy efficiency of envelope is crucial for the minimization of the energy demand in building sector and the achievement of the national and international targets regarding the reduction of global energy consumption. The assessment of the envelope thermal performance is the benchmark for the enhancement of buildings, decision making during the design stage and the evaluation of innovative materials and techniques. Such a material is the Vacuum Insulation Panel (VIP) which is the most promising Super Insulation Material for applications in building sector.In the experimental approach of thesis, it is shown that the in-situ measurement of the thermal resistance (R-value) and the thermal transmittance (U-value) of existing wall is vital for the energy assessment of the building envelope. In this context, the thesis examines and compares the current available and proposes new methods for the in-situ characterization of building walls. The widely used standardized methods for the in-situ R-value measurement of building walls (described by ISO 9869 and ASTM C1155) are extensively analyzed and evaluated. For this purpose, an experimental campaign is performed for the in-situ R-value measurement of tree walls under different measuring conditions. The outcomes provide guidelines for the in-situ R-value measurement, the pre-processing of measurements and the selection of the appropriate method. Furthermore, emphasis is put on the in-situ characterization of lightweight steel-framed (LSF) building envelopes, revealing that there is a gap in literature concerning the in-situ U-value measurement. To fill this gap, the thesis introduces and validates two new methods for the in-situ measurement of the overall thermal transmittance of LSF walls, including the negative and complex effect of metal structure. The two methods, namely the Representative Points Method (RPM) and the Weighted Area Method (WAM), achieve fast and accurate in-situ U-value measurement, combining infrared thermography with the recording and processing of air temperatures and heat flux measurements. The proposed methods could be useful tools for the introduction of standardized methods for the in-situ measurement of the U-value of lightweight envelopes.At the same time, the thesis experimentally investigates the thermal and hygrothermal behavior of VIPs and their impact on the envelope energy efficiency. For this reason, the above new methods along with widely used experimental techniques are employed on innovative building envelopes. Two LSF building envelopes incorporating different types of VIPs are constructed and monitored over an entire year. The first involves a renovated wall in Greece (the first building application of VIPs in Greece), while the second constitutes the entire envelope of a small-scale building, in Switzerland. The comprehensive experimental investigation reveals the benefits of using the Super-Insulation technology in envelope upgrade, but also indicates some weaknesses to overcome.In the numerical approach, the thesis examines and evaluates the existing numerical methods for the energy assessment of innovative building envelopes. The investigation focuses on the simulation of VIP and the calculation of the contribution of thermal bridges, which is the main challenge regarding the LSF envelopes. In particular, two different numerical techniques, the steady state analysis according to ISO 10211 and the whole building simulation in dynamic conditions, are applied to an LSF envelope incorporating VIPs with available measurements from the experimental part of thesis. It is shown that the methods calculate the accurate behavior of VIPs, while the contribution of thermal bridges can be calculated by an EnergyPlus model by means of appropriate modifications of the material thermal properties.In this thesis, the numerical techniques are employed for the investigation of the energy and cost effectiveness of the VIPs for two theoretical real scale buildings. In the first, the installation of a VIP layer at the external walls of an LSF envelope is examined as a measure for the reduction of thermal bridges. It is shown that the VIPs improve the envelope thermal performance by 15% in terms of heating/cooling demand and reduce the effect of all thermal bridges and their hygrothermal issues. Moreover, design modifications on the current construction practices are proposed for the further reduction of the most crucial thermal bridges. In the second application, a techno-economic assessment of the renovation of an old massive building is carried out. The application of VIPs is compared with conventional solutions for cities with different climate conditions and economic factor. The assessment of the cases is performed by means of the calculation of annual savings/operating costs and the payback period, indicating that the use of VIPs with the current prices can be profitable in cold climates and for areas with high rental prices.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2018
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Atsonios, Ioannis
- Ατσόνιος, Ιωάννης
Subjects
dc:subject × 23- Ενεργειακή αξιολόγηση
- Πειραματικές μέθοδοι
- Υπολογιστικές μέθοδοι
- Θερμική συμπεριφορά κτιρίων
- Ενεργειακή αναβάθμιση κτιρίων
- Κτιριακό κέλυφος
- Μονωτικές Σανίδες Κενού
- Ενεργειακή απόδοση κτηρίων
- Υπέρ-μονωτικά Υλικά
- Θερμική διαπερατότητα
- Energy assessment
- Experimental method
- Numerical methods
- Thermal performance of buildings
- Building envelope
- Vacuum Insulation Panel
- VIP
- Super Insulation Material
- U-value
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/44416