Aristotle University Of Thessaloniki (AUTH)
Αύξηση της απόδοσης κοπής επικαλυμμένων κοπτικών εργαλείων μέσω βελτιστοποίησης των τεχνολογικών χαρακτηριστικών τους, με τη χρήση πειραματικών διαδικασιών και αναλυτικών μοντέλων πεπερασμένων στοιχείων
Abstract
dc:descriptionThe aim of the large industries is the optimization of the cutting tools used in manufacturing processes. In achieving the aforementioned goal, the contribution of thin hard coatings is extremely beneficial. Thus, the application of coatings deposited via Physical (PVD) or Chemical (CVD) vapor deposition has been approved as a very effective method for increasing the fatigue strength and prolonging the coated tool life. However, numerous technological parameters are necessary to be explored in order to enhance the cutting performance. The purpose of this doctorate is to examine the dependence of the cutting performance of coated cutting tools from coatings parameters such as coating structure, coating thickness, residual stresses and adhesion quality. Nano-structured multilayer coatings of diverse thickness were deposited on cemented carbide tools for investigating their cutting performance in milling. Such coatings exhibit an improved wear resistance compared to the mono- layer ones of the same thicknesses and chemical composition. The application of nano-structured coatings revealed the growth of the coated tool life when increasing the PVD film thickness. Hereupon, the coated tool life augmentation is almost proportional to the coating thickness enlargement, compensating for the higher tool cost and improving the milling productivity. In addition PVD TiAlN coatings with different residual stress levels were deposited on cemented carbide inserts for investigating their cutting performance in turning. The achieved results revealed the significant contribution of the film compressive stresses in increasing the coating mechanical properties and adhesion, thus prolonging the coated tool life. However, residual stresses larger than a maximum value deteriorate significantly the film adhesion and increases its brittleness. An important field of research in this dissertation was the study of interface fatigue strength between diamond coating and its substrate which were deposited using chemical vapor deposition (CVD). Based on a dynamic simulation of the conducted inclined impact tests, the interface fatigue strength was quantified in terms of a critical shear failure stress (SFLS) characterizing the NCD coating substrate interface. This metric (SFLS) is affected by temperature, adhesion and the existing residual stresses in the coating and in the substrate. The determined temperature-dependent SFLSs were correlated with the developed shear stresses in the investigated coating– substrate interfaces during milling at various coating wear stages in the cutting edge roundness. Thus, evidences were provided for explaining the wear evolution on coated tools with diamond films which could be characterized as well-adherent before the substrate revelation at the cutting edge roundness. Finally, in this context it is approved that the film structure and the adhesion quality of diamond coatings affect significantly the developed wear mechanisms during milling and their tool life performance.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2018
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kotsanis, Tilemachos
- Κοτσάνης, Τηλέμαχος
Subjects
dc:subject × 12Rights
dc:rights- Statement dc:rights
-
- BY_NC_SA
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/44519