National Technical University of Athens (NTUA)
Διερεύνηση των εδαφικών μετακινήσεων λόγω μηχανοποιημένης εκσκαφής σηράγγων σε αστικό περιβάλλον
Abstract
dc:descriptionNowadays, EPB machines are becoming increasingly popular in tunnelling projects, since they allow to proceed minimizing disturbance to surface structures caused by tunnel excavation, which is usually the main challenge when tunnelling in an urban environment. Although, an EPB operation includes numerous complex procedures and components, tunnel design industry usually analyzes bored-tunnels using simplified approaches including semi-empirical methods or 2D finite element analyses neglecting critical parameters of the problem.Hence, the present dissertation investigates ground movements induced due to EPB tunnelling in urban environment utilizing FE code Simulia Abaqus. To do so, an advanced 3D numerical model is developed in the framework of this dissertation for the realistic simulation of an EPB process focusing on the detailed modelling of the key-features of EPB tunnelling.Particularly, the developed model allows to realistically simulate:-total and fluid muck pressure in the excavation chamber;-cutterhead overcut;-conical or telescopic-shaped shield;-potential inow of process liquids in the steering gap cavity;-void of the annular gap;-grout injection pressure at the tail void and its gradual consolidation;-the structural system of the segmental lining (radial and longitudinal joints).Such an advanced numerical method enables the accurate simulation of an EPB/TBM excavation and thus facilitates the assessment of potential risks, mainly due to ground movements in surface (i.e., buildings) and subsurface (i.e., utility networks).Utilizing the developed model, this dissertation investigates the effect of the individual components on tunnelling-induced ground movements and proposes design nomograms. The aforementioned design tools allow for the realistic prediction of ground movements with high accuracy, by correlating and analyzing the most important information of a tunnel project such as tunnel's geometry, ground conditions and machine's specifications.The main points of the aforementioned parametric investigation are:oGeometrical (H, D) and geotechnical (E, cu or σcs etc.) tunnel features strongly affect tunnelling-induced ground movements, since more favorable ground conditions and deeper tunnels reduce surface settlement (Sv,max) and volume loss (VL) results. Similarly, the coefficient of lateral earth pressure (Ko) also influences the ground displacement field around tunnel, since higher Ko regimes induce lower settlement peak values (Sv,max) but wider trough profiles due to the higher mean effective stresses around tunnel and the pronounced arching effect above tunnel crest. Trough width (i) response though is strongly related with the geometrical tunnel features, while there is no significant difference at i parameter between tunnels below or above the watertable.oSupport pressure applied by the machine has a dominant role on tunnel face stability/ deformation conditions. When tunnelling above groundwater table ("dry" conditions) even a low face pressure may be sufficiently enough to reduce and/or stabilize tunnel face extrusion and surface settlements, while face stability conditions and ground movements significantly deteriorate when tunnelling below groundwater table where hydromechanical phenomena occur at the tunnel face and ahead of it. Higher permeability values in such cases result in more drained excavation conditions enhancing face instability, leading to increased ground deformation.oEPB machine's specifications also affect ground movement response, since results show that steering gap magnitude and grout pressure variations may alter ground displacement field around tunnel. The first significantly controls the tunnel boundary deconfinement showing that the larger the steering gap magnitude the more pronounced the surface settlements result, while grout pressure appears to have a more limited impact on ground displacement field due to the rapid grout setting. On the other hand, a potential inow of process liquids (muck, bentonite and grout) in the steering gap cavity acts beneficiary against surface settlements, however to have a significant settlement reduction the full length of the steering gap must be filled otherwise the beneficial effect of the presence of process liquids almost disappears.oIn an attempt to simulate drained and undrained excavation conditions carrying out "equivalent dry analyses" results show that a total stress mechanical analysis (neglecting groundwater) can provide a fair estimation of the anticipated surface settlements of an undrained excavation provided that the material is enforced to deform under constant volume by suitably selecting its elastic parameters. On the other hand, a "dry" analysis (neglecting groundwater) using a buoyant unit weight (b) fails to predict similar ground movement response with a drained analysis, since neglecting the deleterious effect of the seepage forces leads to a profound underestimation of ground displacements. oCarrying out analyses adopting two different ground constitutive models (M-C vs MCC), analyses show that ground movements (surface settlements and volume loss results) are strongly related with the adopted constitutive model. The results indicate that the MCC model leads to significantly higher crown displacements compared to the Mohr-Coulomb analyses, while ground surface settlement predictions are comparable. The observed behavior is explained by the stress-dependent compressibility and more realistic non-linear stress-strain response of the MCC model.The suggested methods for face stability assessment and ground movement prediction may be proved very useful in shield tunnelling operations, since they allow with simple calculations to estimate the tunnelling-induced ground displacements in various ground/permeability conditions. Thus, they enable a reliable assessment of the tunneling influence on urban infrastructures and also provide guidance towards the selection of realistic contingency threshold values and corresponding mitigation measures. The proposed design tools/methods assist in the determination of the optimal machine specifications and operation parameters which will enable both minimization of disturbance (i.e., surface settlements) and cost savings.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2018
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Litsas, Dimitrios
- Λίτσας, Δημήτριος
Subjects
dc:subject × 12Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/44571