Back to search

National Technical University of Athens (NTUA)

Συμπεριφορά και ενίσχυση υποωπλισμένων τοιχωμάτων από σκυρόδεμα

Abstract

dc:description

The present doctoral thesis refers to the experimental and numerical/analytical study of the behavior of reinforced concrete walls, characterized by the absence of the configuration of confined boundary elements and small shear reinforcement ratios, as well as to the evaluation of different strengthening methods. The experimental procedure consisted of the experimental test of a total of 16 medium rise shear walls (eight non-strengthened, seven strengthened and one repaired/ strengthened), which were studied as cantilevers under static cyclic loading. As regards the strengthening methods, the application of Fibers Reinforced Polymers (FRP) sheets and the application of steel elements (strips and angles) were examined. As shown from the experimental results the failure of the non-strengthened walls is associated in all cases with the failure of the compressive zone which is accelerated by the buckling of the longitudinal compressive reinforcement bars. As far as the shear reinforcement is concerned, it appeared to have a greater impact on the extent of the web cracking, and thus on the energy dissipation values and the shear deformation values, and less on the bearing capacity of the walls. With regard to the strengthened walls, based on the experimental results of this thesis, both the FRP sheets and the four different configurations with steel elements appeared to lead to improved behavior in terms ductility values, mainly due to the limitation of the buckling of the compressive longitudinal rebars. Secondary, the control of the web shear cracking (either with horizontal strips or diagonal angles) appeared to lead to hysteretic cycles with less pinching effects and therefore to higher energy dissipation values and also to lower shear deformation values. The assessment of the behavior of the walls was carried out with two different approaches. Firstly, by applying the analytical/empirical relations included in Eurocode 8 - Part 3, which appeared to lead to conservative values, especially with regard to the shear strength, and secondly, by using two different linear beam elements included in OpenSees library for Non-Linear Analysis: the Force-Based BeamColumn Element (FBE) which is a flexural element and the Flexure-Shear Interaction DisplacementBased Beam-Column Element (FSI) that additionally incorporates the influence of the shear component. As found during the analysis process, the flexural element FBE generally approaches with sufficient precision the failure displacement in cases of adequately reinforced walls against shear, while especially in cases of intense buckling of the compressive rebars with simultaneous absence of concrete confinement, the analysis with FBE led to descending post-yield branches, something which was also experimentally observed. In contrast, in the case of insufficiently reinforced walls against shear, the use of FSI approaches better the shear degradation as the ductility increases. However, in cases of low shear reinforcement ratioσ, FSI led to a large underestimation of the shear (and of the total) strength and therefore to severely descending post-yield branches, something which was not experimentally confirmed.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Christidis, Konstantinos
  • Χριστίδης, Κωνσταντίνος

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/44671

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Christidis, Konstantinos; Χριστίδης, Κωνσταντίνος. Συμπεριφορά και ενίσχυση υποωπλισμένων τοιχωμάτων από σκυρόδεμα. National Technical University of Athens (NTUA), 2017. http://hdl.handle.net/10442/hedi/44671