Back to search

University of Ioannina

Συστήματα βασισμένα σε πολύπλοκα μεταλλικά κράματα αλουμινίου: ανάπτυξη, χαρακτηρισμός και επιφανειακές ιδιότητες

Abstract

dc:description

Complex metallic alloys (CMAs) is a new category of metallic materials that are characterized by very large unit cells that contain a substantial number of atoms and very big lattice parameters. CMAs exhibit a lot of attractive properties such as high hardness, low friction coefficient and high resistance to oxidation. Their application has been restricted by a major drawback, their low ductility at room temperature. A feasible way to overcome this limitation is to use CMAs as reinforcement in a ductile matrix. Some known CMAs are: Al-Cu-Fe, Al-Cu-Fe-Cr, Al-Cr-Fe, Al13Co4, Al9Co2. This thesis is focused on Al-Al9Co2 system (Al-Co alloys). The main objective of this effort is to study the influence of the preparation method on the microstructure and surface degradation properties of Al-Co alloys. Moreover, to study a wide range of Al-Co compositions as far as their microstructure, corrosion resistance and wear resistance are concerned. Al-Co alloys of various compositions (2-20 wt.% Co) were prepared by casting, vacuum arc melting and powder metallurgy. Their microstructure was studied by Χ-ray diffraction, optical microscopy and scanning electron microscopy. Corrosion behaviour was evaluated by potentiodynamic polarization and chronoamperometry measurements in 3,5% NaCl and 1M H2SO4. Sliding wear experiments were performed to evaluate the wear performance of Al-Co alloys. For comparison reasons, the corrosion behaviour, sliding wear resistance of pure aluminum, widely used aluminum alloys and industrial alloys were evaluated. The preparation method and composition heavily affect the attained microstructures. However, regardless of the preparation method, all Al-Co alloys exhibited high resistance to localized forms of corrosion in all studied environments. Furthermore, Al-Co alloys exhibited better sliding wear performance compared to widely used commercial aluminum alloys. It is worth noticing that Al-Co alloys with modest Co compositions had significantly improved resistance to surface degradation compared to aluminum alloys. Corrosion and sliding wear mechanisms were formulated.

Degree

thesis:*
Grantor dc:publisher
University of Ioannina
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Sfikas, Athanasios
  • Σφήκας, Αθανάσιος

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/44729

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Sfikas, Athanasios; Σφήκας, Αθανάσιος. Συστήματα βασισμένα σε πολύπλοκα μεταλλικά κράματα αλουμινίου: ανάπτυξη, χαρακτηρισμός και επιφανειακές ιδιότητες. University of Ioannina, 2017. http://hdl.handle.net/10442/hedi/44729