Back to search

Aristotle University Of Thessaloniki (AUTH)

Ανάπτυξη φωτοανόδων βασισμένων σε οξείδια ημιαγωγών (TiO2 και WO3) για χρήση τους στην φωτοηλεκτροχημική οξείδωση οργανικών ουσιών (ρύπων/καυσίμων)

Abstract

dc:description

A potential solution to environmental pollution and global warming is the design and synthesis of a variety of photocatalysts. The pioneering work of Fujishima and Honda paved the way in introducing the TiO2-based photocatalysts to photoelectrochemical water splitting. Since then, TiO2 is the most widely used photocatalyst in many commercial applications, such as photo/electro-chemical water treatment, dye-sensitized solar cells, self-cleaning materials and other, because of its high photoreactivity, long-term stability, high corrosion resistance, improved biocompatibility and low cost. Besides all these beneficial properties, its major disadvantage is its wide energy gap and as a result the fact that it absorbs sun’s electromagnetic radiation only in UV region (a small portion of its radiation power). Thus, there is a search for alternative solutions, which vary from replacing the TiO2-based photocatalyst with a semiconductor which absorbs in the visible, like WO3, to replacing the powder form of TiO2 with other geometries/morphologies such as those of TiO2-nanotubes. Furthermore, a new type of materials can be introduced in photocatalyst systems such as 2-D graphene enchasing conductivity through hetero-junctions, improving transparency and electron-hole de-coupling. Another approach in improving the photocatalysts’ efficiency is decorating it with a noble metal such as Pt. This surface modification improves electrocatalytic activity and suppresses electron-hole recombination.In this study, we have used all previous modifications of photo/electro-catalysts and studied their behavior in fuel/pollutant photo-oxidation, such as those of CH3OH chloramphenicol respectively. First, we prepared and tested a WO3-based photocatalyst which was decorated with Pt, through galvanic replacement of a Cu/WO3 electrode prepared by Cu electrodeposition, improving Pt dispersion and at the same time enhancing its electrocatalytic properties. In addition to its photocatalytic response our new photo/electro-catalyst Pt/WO3 benefits from the synergistic effect of Pt and WO3 which removes the adsorbed CO intermediate during methanol oxidation from the Pt-electroactive sites. This results in a 3-fold increase in intrinsic (per electroactive area) electro-oxidation efficiency compared to that of the commercial electrocatalyst Pt/C ETEK. Samples of higher Pt content improved the electrocatalytic properties, while those of lower Pt content was more suitable for photocatalysis.Second, we produced TiO2-nanotube electrodes and compared them with TiO2 sol-gel electrodes. The electrode photo/electro-chemistry was examined through Electrochemical Impedance Spectroscopy (EIS) from which we concluded that although nanotube electrodes have a higher electroactive area, sol-gel electrodes have higher intrinsic catalytic reactivity. However, through their overall photo-oxidative reactivity, the nanotubes exhibited much higher rates for chloramphenicol (a typical pharmaceutical waste) UV-photo-electro-oxidation. Finally, we prepared reduced graphene oxide/ titanium dioxide (rGO/TiO2) powder systems, substituting the need of amorphous C as the conductive binder through hetero-junctions. This 2D material with a very nice dispersion through the TiO2 nanoparticles improves the electron-hole decoupling, conducts faster and is the base of the synergistic effects with TiO2 and Pt. These rGO/TiO2 nanoparticles were decorated with Pt through photochemical deposition. Limited dispersion was achieved compared with that of Pt/WO3 electrodes decorated by galvanic replacement. Nevertheless, both type of electrodes, rGO/TiO2 and Pt/rGO/TiO2, exhibited high UV-photoresponse. The presence of Pt in conjunction with the synergistic effects with rGO or/and with TiO2 improved the UV-photo-electro-oxidation of CH3OH (a typical photo-fuel) significantly.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Karanasios, Anastasios-Nikolaos
  • Καρανάσιος, Αναστάσιος-Νικόλαος

Subjects

dc:subject × 20

Rights

dc:rights
Statement dc:rights
  • BY_NC_ND
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/44852

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Karanasios, Anastasios-Nikolaos; Καρανάσιος, Αναστάσιος-Νικόλαος. Ανάπτυξη φωτοανόδων βασισμένων σε οξείδια ημιαγωγών (TiO2 και WO3) για χρήση τους στην φωτοηλεκτροχημική οξείδωση οργανικών ουσιών (ρύπων/καυσίμων). Aristotle University Of Thessaloniki (AUTH), 2018. http://hdl.handle.net/10442/hedi/44852