Back to search

National Technical University of Athens (NTUA)

Σύνθεση και χαρακτηρισμός καινοτόμων νανοδομημένων υλικών τιτανίας για φωτοκαταλυτική αποικοδόμηση ρύπων στο νερό

Abstract

dc:description

The main objective of the present thesis was the development of photoactive semiconductors with an expanded optical absorption spectrum, which could be able to degrade water pollutants during the illumination with radiation of appropriate wavelength, through the mechanism of heterogeneous photocatalysis. However, as the use of the semiconductors in the form of nanoparticulate suspensions introduces technical limitations to the wastewater decontamination in real conditions, suitable and high-efficiency structures have been sought in order to allow future integration into decontamination technologies.Regarding the aforementioned considerations, the research work has focused on the preparation and characterization of innovative immobilized titanium dioxide (or titania – TiO2) semiconductive nanomaterials. Intense efforts were given in understanding the synthetic mechanisms of titania nanostructures in morphologies of well-aligned nanotubes or photonic crystals with inverse opal structure, in combination with the optical absorption expansion in the visible spectrum of solar light. In addition, the new materials photocatalytic activity enhancement was assessed, by studying the degradation of water emerging contaminants in lab scale, such as methylene blue azo-dye, caffeine psychostimulant, salicylic acid pharmaceutical and hexavalent chromium industrial pollutant.The preparation of titania nanotubes (TNTs) was based on the electrochemical technique of anodic oxidation of a metallic titanium foil, where eventually well aligned and vertically oriented titania nanotubes on the metallic substrate were obtained. By adjusting the bath composition, the anodization time and the applied current densities, the anodization conditions that affect the nanostructures geometry were fully determined, so that nanotubes with a specific length and / or porosity can be synthesized.Photocatalytic experiments with different pollutants were attested the 10 μm length titania nanotubes as the optimum nanostructure geometry, while further length increment led to performance saturation. The 10 μm TNTs remained photocatalytically active, without any performance reduction, after ten consecutive photocatalytic cycles, achieving complete removal of the organic compounds (mineralization). The effect of changing the pH of the aqueous medium on photocatalytic processes was then studied. Finally, self-photoactivation of titania nanotubes in visible light was performed, by introducing crystal defects into the semiconductor’s matrix using electrochemical methods or heat treatment under vacuum, without causing any morphological alterations.Subsequently, photonic crystals with inverse opal structure, which were immobilized onto a glass substrate, were studied as alternative photocatalysts,. The preperation of titania photonic crystal was based on impregnating a polymeric template of polystyrene microspheres of 350 nm diameter, arranged in a periodically centered cubic matrix (opal structure), with precursor solutions of the semiconductor. The selection of the particular microspheres defined the periodicity of the final titania nanostructure and explained the existence of the photonic gap in the absorption spectrum of the semiconductor from 400 to 500 nm. The self-degradation experiments of the adsorbed methylene blue dye on the photonic crystal surface revealed that photoactive titania opal nanostructures in the photonic band gap range exhibits enhanced optical absorption at the corresponding wavelengths and therefore higher photocatalytic activity in the visible is expected.Considering the above results, the synthesis and characterization of titanium nanoparticulate powder by sol-gel techniques, modified by nitrogen and copper in various ratios, was initially chosen, in order to be used as filler material for photonic crystals. The synthesized nanostructures mainly consisted of the anatase crystal phase, which were superficially covered by a nitrogen-rich carbonaceous shell and well-dispersed copper oxides. The existence of the surface formations widened the optical absorption of the modified titania up to 500 nm and increased the photodegradation of the studied pollutants of caffeine, salicylic acid and hexavalent chromium.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2018

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Arfanis, Michail
  • Αρφάνης, Μιχαήλ

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/44923

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Arfanis, Michail; Αρφάνης, Μιχαήλ. Σύνθεση και χαρακτηρισμός καινοτόμων νανοδομημένων υλικών τιτανίας για φωτοκαταλυτική αποικοδόμηση ρύπων στο νερό. National Technical University of Athens (NTUA), 2018. http://hdl.handle.net/10442/hedi/44923