Back to search

Democritus University of Thrace (DUTH)

Νανοσύνθετα υλικά με βάση το τσιμέντο με ευφυή χαρακτηριστικά

Abstract

dc:description

A long-term challenge in the field of construction is the extremely brittle behavior of cement-based materials with limited strain capacity. Over the last decade, with the rapid development of nanotechnology, new perspectives are presented to overcome these problems by introducing the use of nano and micro fibers as reinforcing materials to control and limit the cracking propagation at the nano and micro scale, respectively. It is of great interest that carbon nanotubes (CNTs) exhibit outstanding mechanical properties such as tensile strength of 65-93 GPa and stiffness about 1 TPa. Their exceptional electrical properties in combination with their high aspect ratio make them ideal reinforcing materials, offering outstanding improvement to the mechanical and electrical properties of cementitious matrices that are being used in structural applications. The present Doctoral Thesis entitled: “Multifunctional cement based nanocomposites with advanced mechanical properties and self-sensing ability” was highly motivated by the idea of studying the effect of mechanical and chemical functionalization of carbon nanotubes on the mechanical and electrical properties of cement based nanocomposites in order to develop high-performance and advanced self-sensing cementitious materials that could effectively be used as construction materials and at the same time exhibit self-sensing capability to monitor their strain and cracking. To achieve this, the cement based materials were reinforced at the nanoscale, by incorporating carbon nanotubes (CNTs) and carbon nanofibers (CNFs), as well as at the microscale by incorporating microscale carbon fibers (CFs) and polypropylene (PP) microfibers.Carbon nanotubes and carbon nanofibers exhibit superior mechanical and electrical properties. Their particular graphene electronic structure allows them to exhibit semi-conducting, as well as quasi-metallic and metallic behavior. In combination with their high aspect ratio, supreme stiffness and high strength make them excellent reinforcing materials, offering outstanding improvements to the mechanical and electrical properties of the nanocomposites. Earlier results in the literature suggest that multiwall carbon nanotubes (MWCNTs) fundamentally modify the nanostructure of cement based materials, by increasing the amount of high stiffness C-S-H and reducing nanoporosity. To unlock the nanotubes' contribution in potential applications it is necessary to take into account the differences in their geometrical and physical characteristics, and structure. MWCNTs have a high aspect ratio, low bulk density and an extended specific area, which is of particular interest for adsorption and reactions taking place on the nanotubes' surface. The interface length and strength depend directly on the geometrical characteristics of the nanotubes, hence a higher aspect ratio is required for an effective transfer load from the matrix to the nanotube. Another important parameter affecting the properties of the MWCNT reinforced cementitious materials is the dispersion of MWCNTs, which has proven a challenging and rather inconsistent procedure, primarily due to their inherent hydrophobic nature and the strong van der Waals forces that cause entanglement and the formation of bundles. Characteristics such as the wall number, bulk density, aspect ratio and surface defects induced by methods of functionalization, also play a crucial role in their dispersion, hence affecting their reinforcing efficiency and electrical properties. However, the successful application of nanotechnology in the construction materials by using nanoscale carbon fibers to improve (a) the mechanical properties and (b) the piezoresistive response of the cement mortar and concrete nanocomposites, still remains a challenge.Whilst most of the studies so far concentrate in experimentally determining either the effect of the aspect ratio of CNTs or their chemical functionalization in the mechanical properties of nanoreinforced cement pastes and mortars, there is practically no information available in the literature about the effect of the bulk density of CNTs on the mechanical properties of the cement-based nanocomposites. Results from the literature suggest that reinforcing at the nanoscale with low bulk density CNTs results in a more efficient and uniform dispersion in most types of matrices. In the present Ph.D. thesis a thorough experimental approach was followed: (i) to determine the effect of aspect ratio, bulk density and mechanical and chemical functionalization of well dispersed CNTs on the strength, stiffness and energy absorption capacity, and (ii) to evaluate the multi-functionality and smartness of cement mortars, reinforced with highly dispersed carbon nanotubes. Dispersion of nanoscale fibers was achieved by adding the nanofibers to an aqueous polycarboxylate based surfactant solution, at a surfactant to nanofibers weight ratio of 4.0. Ultrasonic energy close to 2800 kJ/l is applied to the suspensions to achieve uniform dispersion of nanoscale carbon fibers. The quality of the nanoscale fibers’ dispersion was evaluated through fresh property tests namely flow ability and time of setting.It was found that the CNT count depends on the bulk density: the lower the bulk density the higher the fiber count. All CNT reinforced mortars exhibit much higher flexural strength, Young's modulus and energy absorption capability, about 100%, than the plain one. It was found that the lower bulk density of CNTs results in an enhanced reinforcing efficiency and improved mechanical properties of mortar nanocomposites. In addition, the Young’s modulus of the nanocomposites reinforced with different types of carbon nanotubes, i.e. different geometric and physical characteristics, was theoretically predicted using micromechanical models such as the Benveniste model (based on Mori-Tanaka’s theory) and Voigt and Reuss models which represent the upper and lower bound of the modulus of elasticity, respectively. It was shown that the modulus results obtained from the Benveniste model are in perfect agreement with the experimental results and can be used to predict the modulus of elasticity of the mortar nanocomposites.Another major objective of this Doctoral thesis was to improve the multi-scale mechanical behavior of mortars by using hybrid (ladder scale) reinforcement at the nano and micro scale. Network of well dispersed CNFs, CF or PP micro fibers were used as reinforcement. Three point bending tests were conducted on 40 mm × 40 mm × 160 mm and notched 20 mm × 20 mm × 80 mm prismatic mortar beams and a thorough analysis of the load to mid-deflection and the load to C.M.O.D (Crack Mouth Opening displacement) curves took place to evaluate their mechanical behavior at the elastic stage (pre-peak mechanical response) and after the formation of first cracking (post-cracking energy absorption capability). The hybridization was found to enhance simultaneously the flexural strength, Young’s modulus and energy absorption capability of the cementitious matrix composite compared to the singly-reinforced composites or plain mortar. Carbon nanotubes, nanofibers and microscale fibers also exhibit remarkable intrinsic electrical conductivity providing the cementitious composites with electromechanical response and self-sensing ability. To evaluate the impact of aspect ratio and bulk density of CNTs on the multifunctionality and the smartness of the nanoreinforced mortars, piezoresistivity experiments were conducted by measuring the electrical resistance (DC) of the specimens under monotonic and cyclic compressive loading. It was found that a very small CNT content of 0.2 wt% cement yielded the highest fractional change in resistivity, (up to ≈18%) under cyclic compressive loading in the elastic region (up to 5 MPa), which is indicative of the amplified sensitivity of the material. The effect of hybrid reinforcement in self sensing ability was further evaluated by measuring the electrical resistance (AC) of the specimens under monotonic and cyclic compressive loading. From the experimental findings, it is safely attributed that the ladder scale reinforcement beneficially alters the structure of mortar matrix, and provides the material with the ability to detect crack initiation and propagation and failure detection through the recorded changes of its resistivity.Finally, the influence of the addition of highly dispersed CNTs and CNFs on the corrosion behavior of nanomodified Portland cement mortars was investigated. Corrosion potential (Ecorr) and corrosion current density (Icorr) were measured in specimens reinforced with CNFs and CNTs, partially immersed in a 3.5 % NaCl solution, using the Linear Polarization Technique (LPR) to evaluate their corrosion resistance. The electrochemical mass loss was also calculated using Faraday’s Law. The corrosion study shows that the addition of 0.1 wt% CNTs and CNFs decreases the corrosion rate and significantly increases the resistance to corrosion by delaying the onset of the corrosion reaction.

Degree

thesis:*
Grantor dc:publisher
Democritus University of Thrace (DUTH)
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Falara, Maria
  • Φαλάρα, Μαρία

Subjects

dc:subject × 17

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/45137

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Falara, Maria; Φαλάρα, Μαρία. Νανοσύνθετα υλικά με βάση το τσιμέντο με ευφυή χαρακτηριστικά. Democritus University of Thrace (DUTH), 2019. http://hdl.handle.net/10442/hedi/45137