Back to search

Aristotle University Of Thessaloniki (AUTH)

Πράσινα σύνθετα πολυμερικά προϊόντα από ανανεώσιμες πρώτες ύλες για τη βιομηχανία ξύλου

Abstract

dc:description

In recent years, the use of natural resources has been stepped up for the production of chemicals, fuels and energy. This has resulted from the need to reduce greenhouse gas emissions, reduce waste, save petrochemical resources, and create products that are human and ecosystem-friendly. This created a new form of economy, the bio-economy, which offers the opportunity to create new entrepreneurship and jobs.Wood plays a key role in bio-economy not only because it provides many of the commodities of everyday life but also because it is a good source for producing a variety of chemical compounds and fuels derived from it through the process of bio-refining. However, the widespread use of wood along with the rapid growth of the world's population raises serious concerns in the sawnwood and wood-based panels industries (such as particleboard, MDF, OSB, plywood, etc.) on its long-term sufficiency and the sustainable manufacturing of products from it. It is, therefore, necessary to find solutions that will ensure the long-term growth of these industries, which are the main sectors of wood consumption.In this work, the replacement of wood by waste material from the lignocellulosic plants hemp, kenaf and jute in the production of particleboards was studied. These materials made it possible to manufacture particleboards with a much lower density (400kg/m3) than the conventional ones (600 – 700kg/cm3) without degrading their mechanical properties. Also, Torrefaction Condensates (TCs) from Aspen, Birch, Pine and a mixture of Spruce/Pine were studied as phenol substitutes in the synthesis of phenol- formaldehyde resins while the light fraction from the catalytic pyrolysis of Beech wood was used to adjust pH during the synthesis of typical urea-formaldehyde resins in place of petrochemical acetic acid or formic acid traditionally used. In addition, phenol-formaldehyde resins with partial replacement of phenol with organosolv lignin and isolated soy protein as well as resins of tannin crosslined with hexamethyleneteramine were studied as adhesives of wood, kenaf, hemp and jute. The properties of these resins were determined by typical laboratory analysis and instrumental methods. The whole study is divided into four chapters. Specifically: In CHAPTER 1, wood torrefaction condensates considered as a waste from the process, were studied as phenol substitutes in the synthesis of phenol-formaldehyde adhesives suitable for plywood production. In more details, wood from Aspen, Birch, Pine and a mixture of Spruce and Pine was torrefied and the condensable fractions (TCs) from its decomposition having a dew point above 140°C were used to replace phenol up to 40%w/w in the synthesis of resol type phenol-formaldehyde (PF) polymers (resins) suitable for use as adhesives in plywood panels manufacturing. The physicochemical properties of these polymers were determined by typical laboratory analysis, while the thermal properties of the torrefaction condensates (TCs) and the polymers (resins) prepared with them, were studied by Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) measurements. The bonding ability of the new resins was tested by their application in the production of 3-ply plywood panels. The panels were tested and evaluated according to European standards used by the industry. It was found that the TCs studied were suitable for this application whereas TC from Pine followed by TC from Birch had the best overall performance. This study was carried out in the framework of a project between CHIMAR HELLAS SA in Greece and the Energy Research Centre (ECN) of the Netherlands. In CHAPTER 2, organosolv lignin was studied as a 50% w/w phenol substitute in the synthesis of phenol-formaldehyde resins. In order to improve its functionality, a treatment method was developed which includes lignin washing, drying and grinding in a ball mill. This resulted in an increase in its purity and decrease in particle size and hence increase in its reactivity. The results of the treatment were confirmed by AFM measurements. The properties of the new resins were determined by typical laboratory analysis while their thermal properties were studied by TGA and DSC. Their bonding ability was assessed via their application to plywood production on a laboratory scale. The plywood panels were tested for their mechanical properties according to European standards EN 314-1:2004 and EN314-2:1993. Formaldehyde emissions were determined by the desiccator method (ISO 12460-4) while for their evaluation to fire they were subjected to Cone Calorimetry measurements. It has been found that such resins may replace a typical PF resin in plywood production and are more thermally stable than them at temperatures up to 300°C. In addition, plywood panels made with such resins are burned at a slower rate than panels made with a typical PF resin. This study was carried out in the framework of the EU FP7 project BIOCORE that was supported by the European Commission through the 7th Framework Programme for Research and Technical development (contract no FP7-241566).In CHAPTER 3, the aqueous phase resulting from the catalytic pyrolysis (AQcatPy) of Beech wood was used as an acidifying agent during the synthesis of a typical urea-formaldehyde (UF) resin. Its performance was compared with typical UF resins prepared with petrochemical acetic acid (PAA) and formic acid (PFA) as acidifying agents. The resins were synthesized on a laboratory scale and characterized by Fourier Transform Infrared Spectroscopy (FTIR), Gel Permeation Chromatography (GPC), Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). The bonding ability of the resins was tested through their application in the production of particleboards (PBs). It has been found that such resins can be used in the manufacture of particleboards following the same production process and applying the same production conditions as those when a typical UF resin is used. Particleboards produced with such resins show higher resistance to thickness swelling in a humid environment compared to panels made with a typical UF resin, while all other properties remain at the same level.This study was carried out in the framework of the BIOBOOST (Development of new or improved sustainable bio-energy carriers) Collaborative Project funded by the 7th Framework programme of the European Union, theme energy 2011.3.7-1, under grant agreement 282873.In CHAPTER 4, shives (also known as particles or chips) from the woody inner part of the stem of the lignocellulosic plants kenaf (8 different varieties), hemp and jute were studied as materials for the production of lightweight particleboards. The adhesive materials studied were a) typical Urea–Formaldehyde (UF) and Phenol-Formaldehyde (PF) petrochemical resins, b) PF resins where phenol was replaced by lignin and soy protein isolate up to 80%w/w; and c) tannin-hexamethylentetramine adhesive mixture of. Both lignocellulosic materials and resins were studied for their physicochemical properties using established laboratory methods while boards were tested for their physical and mechanical properties according to the current European standards. Their thermal properties were studied with TGA and DSC measurements. It was found that it is possible to produce lightweight particleboards from the studied lignocellulosic plants either when used alone or in a mixture of two or three in combination with any of the studied resins. Among the various kenaf varieties studied the one codenamed H368 had the best overall performance. The thermal study of the particleboards has shown that the production of hemp boards with PF-type resins modified with soy protein isolate or lignin can be carried out at lower temperatures than when a typical PF resin is used.This research was carried out in the framework of the project FIBRACOM. This project was co-funded by the participating companies, the European Union - European Regional Development Fund and the National Resources (Ministry of Education and Religious Affairs / GSRT / EYDE-ETAK) through the National Strategic Reference Framework (NSRF 2007-2013) Program / Operational Program "Bilateral RTD Cooperation between Greece and China 2012-2014" (project number 12CHN322).The synthesis of the polymers (resins), the determination of their physicochemical properties, and their application in the manufacture of boards as well as the production, testing and evaluation of the boards were made at the premises of CHIMAR HELLAS SA. The FTIR, XRD, TGA and DSC measurements were carried out at the premises of Physics School, Faculty of Sciences, AUTH. The GC-FID & GCxGC-ToFMS measurements were performed at CERTH, AFM measurements were made at SYNPO in the Czech Republic while cone calorimetry measurements were made at the Latvian Wood Chemistry Institute (LIWC).The products developed in each chapter of this study are innovative and contribute to the replacement of petrochemical materials from other of renewable sources thus contributing to the bio-economy and the EU’s target for producing 10% of chemicals and fuels by raw-materials of renewable sources by 2020. The EU target for 2050 is this production to reach 50%. For the synthesis of resins and production of panels, the procedures followed and the devices used were close to those available in the relative industries, while the evaluation of the finished products was carried out in accordance with current standards. They are therefore eligible to be introduced to higher-scale productions, provided of course that the necessary raw materials are available in the required quantities.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Papadopoulou, Electra
  • Παπαδοπούλου, Ηλέκτρα

Subjects

dc:subject × 10

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/45149

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Papadopoulou, Electra; Παπαδοπούλου, Ηλέκτρα. Πράσινα σύνθετα πολυμερικά προϊόντα από ανανεώσιμες πρώτες ύλες για τη βιομηχανία ξύλου. Aristotle University Of Thessaloniki (AUTH), 2019. http://hdl.handle.net/10442/hedi/45149